Buddy 125 Wiring Diagram

Discussion of the Genuine Buddy, Hooligan, Black Jack and other topics, both scooter related and not

Moderator: Modern Buddy Staff

Post Reply
User avatar
djelliott
Member
Posts: 1364
Joined: Thu Jun 05, 2008 4:44 pm
Location: Avon Lake, OH

Buddy 125 Wiring Diagram

Post by djelliott »

Does anyone have a higher resolution copy of the buddy's wiring diagram? The one in the service manual, available here, is to low to be able to read what everything is. I'm trouble shooting an issue where my Buddy keeps blowing the headlight. Any help with a good diagram would be much appreciated. Thank you.

Dustin
Prima pipe
UNI filter
125 Main Jet
2000RPM Stall Spring
1500RPM Clutch Springs
Dr. Pulley Variator with 11 Gram Sliders
NCY Front Forks
Prima/NCY 161cc Big Bore kit With 150 Head
KS Power GY6 Performance Springs
NCY Secondary Shieve
User avatar
djelliott
Member
Posts: 1364
Joined: Thu Jun 05, 2008 4:44 pm
Location: Avon Lake, OH

Post by djelliott »

BUMP
Prima pipe
UNI filter
125 Main Jet
2000RPM Stall Spring
1500RPM Clutch Springs
Dr. Pulley Variator with 11 Gram Sliders
NCY Front Forks
Prima/NCY 161cc Big Bore kit With 150 Head
KS Power GY6 Performance Springs
NCY Secondary Shieve
User avatar
spencerpeterson85
Member
Posts: 30
Joined: Sun Mar 11, 2007 2:40 am
Location: Bountiful, Utah

Post by spencerpeterson85 »

I can read mine great. It's for my 2007 125. Would that work? If so I'll try to locate a scanner or find some other way of getting it to you. Fax maybe?
"Emancipate yourselves from mental slavery,
none but ourselves can free our minds,
Have no fear for atomic energy,
cause none of them can stop the time..."
-Bob Marley
User avatar
djelliott
Member
Posts: 1364
Joined: Thu Jun 05, 2008 4:44 pm
Location: Avon Lake, OH

Post by djelliott »

spencerpeterson85 wrote:I can read mine great. It's for my 2007 125. Would that work? If so I'll try to locate a scanner or find some other way of getting it to you. Fax maybe?
Yes that would be fantastic. I'll PM you my email. Thanks for the reply.

Dustin
Prima pipe
UNI filter
125 Main Jet
2000RPM Stall Spring
1500RPM Clutch Springs
Dr. Pulley Variator with 11 Gram Sliders
NCY Front Forks
Prima/NCY 161cc Big Bore kit With 150 Head
KS Power GY6 Performance Springs
NCY Secondary Shieve
Thadsgood
Member
Posts: 161
Joined: Mon Jul 09, 2007 10:43 pm
Location: michigan

me too

Post by Thadsgood »

I wouldn't mind being able to see that diagram, myself
User avatar
djelliott
Member
Posts: 1364
Joined: Thu Jun 05, 2008 4:44 pm
Location: Avon Lake, OH

Re: me too

Post by djelliott »

Thadsgood wrote:I wouldn't mind being able to see that diagram, myself
I guess it should be posted to the tech library. Any moderators agree?
Prima pipe
UNI filter
125 Main Jet
2000RPM Stall Spring
1500RPM Clutch Springs
Dr. Pulley Variator with 11 Gram Sliders
NCY Front Forks
Prima/NCY 161cc Big Bore kit With 150 Head
KS Power GY6 Performance Springs
NCY Secondary Shieve
User avatar
spinbud
Member
Posts: 44
Joined: Thu Jun 19, 2008 9:56 pm
Location: N.Georgia

wiring diagram

Post by spinbud »

Hey, where'd you get that diagram. 2004 fuzzy is the best I can do. Thanks
User avatar
spencerpeterson85
Member
Posts: 30
Joined: Sun Mar 11, 2007 2:40 am
Location: Bountiful, Utah

Post by spencerpeterson85 »

Here's the diagram. It's a big file so it might take a while to load on the page. It doesn't say copyright anywhere on it so I don't feel bad sharing. This was just pasted to the last page in my manual. I don't know if everyone else had the same thing or not.
Image

If you want to see a bigger picture go to this link-http://www.flickr.com/photos/22255953@N ... 2/sizes/l/
"Emancipate yourselves from mental slavery,
none but ourselves can free our minds,
Have no fear for atomic energy,
cause none of them can stop the time..."
-Bob Marley
User avatar
Perkussion
Member
Posts: 238
Joined: Tue May 27, 2008 2:35 am
Location: Pace, Florida
Contact:

Post by Perkussion »

Mine blew the original bulb in less than 5 months.
I replaced it with a Silver Star 55 watt bulb and the low beam blew less than an hour later.
I ran it with the high beam and shortly that blew also.
I am taking it to the dealer today. I'll let you know what they find.
User avatar
djelliott
Member
Posts: 1364
Joined: Thu Jun 05, 2008 4:44 pm
Location: Avon Lake, OH

Post by djelliott »

Perkussion wrote:Mine blew the original bulb in less than 5 months.
I replaced it with a Silver Star 55 watt bulb and the low beam blew less than an hour later.
I ran it with the high beam and shortly that blew also.
I am taking it to the dealer today. I'll let you know what they find.
Yeah, same thing here. Also my tail light and license plate light. I pulled of the voltage regulator and tested it with a multi meter. Sure enough, bad readings on the red and red white pins. Gotta get a new one. Hopefully the regulator and the brand new $18 bulb that blew are covered under the warranty.

Dustin
Prima pipe
UNI filter
125 Main Jet
2000RPM Stall Spring
1500RPM Clutch Springs
Dr. Pulley Variator with 11 Gram Sliders
NCY Front Forks
Prima/NCY 161cc Big Bore kit With 150 Head
KS Power GY6 Performance Springs
NCY Secondary Shieve
User avatar
djelliott
Member
Posts: 1364
Joined: Thu Jun 05, 2008 4:44 pm
Location: Avon Lake, OH

Post by djelliott »

Thanks spencer for the nice sharp scan. That really helped.

Dustin
Prima pipe
UNI filter
125 Main Jet
2000RPM Stall Spring
1500RPM Clutch Springs
Dr. Pulley Variator with 11 Gram Sliders
NCY Front Forks
Prima/NCY 161cc Big Bore kit With 150 Head
KS Power GY6 Performance Springs
NCY Secondary Shieve
User avatar
GrantSR
Member
Posts: 50
Joined: Tue Jun 17, 2008 2:06 pm
Location: Tucson, AZ
Contact:

.PDF of Buddy 2007+ Wiring Diagram

Post by GrantSR »

I was able to get the guys at the local shop to print out a clean copy of the wiring diagram. I didn't want to push my luck and ask them to just put the .PDF file onto my thumb-drive so I took what I could get and have scanned it BACK into a .PDF file. It is the same diagram as the image shown above but it is scanned at 600 dpi so it should print out just as nice as what I have in my hands.
Attachments
Buddy2007Wiring.pdf
Wiring diagram for Buddy 2007 & Up scanned at 600 dpi.
(124.88 KiB) Downloaded 57 times
Post Reply