Installed NCY Super Transmission kit on 170i

monnoracing · Post by **monnoracing** » Mon Sep 24, 2012 7:15 am

Pretty Easy Install with the exception of testing different combos. I purchased it from scooter works. The compression spring that comes with the kit was the only thing that I ended up not using. I didnt lose any top speed with the 3g roller drop and it takes off so well now you have to be careful to not flip. Mpg I feel will be less now but with the 30 degree temp drop and enjoyment of the faster scooter I cant say for sure yet. First tank was 69 mpg but I was leaving every light full throttle. If you are looking to purchase this kit I really suggest just buying the ncy clutch and bell only for your 170i.

skully93 · Post by **skully93** » Mon Sep 24, 2012 2:42 pm

you might mixnmatch some rollers for better balance so it's not RPM'ing out of it's little mind, and you still retain your top speed (or pretty close).

I went a little light on my Zuma, which ended up accelerating quickly to 30, not going higher, and then the belt shredded. Keep an eye on it.

monnoracing · Post by **monnoracing** » Mon Sep 24, 2012 3:20 pm

I have not lost any top speed.

skully93 · Post by **skully93** » Mon Sep 24, 2012 5:42 pm

sorry, my lack of coffee when I read it at first...derp.

Glad you're loving it!

Rusty Shackleford · Post by **Rusty Shackleford** » Wed Oct 03, 2012 8:40 pm

What were your stock roller weights VS the ones in the kit's weight?