Remove Front Rack
Moderator: Modern Buddy Staff
-
- In Time Out
- Posts: 85
- Joined: Thu Aug 09, 2012 6:54 pm
Remove Front Rack
I have a buddy that came with a front rack. I would like to remove the rack as it doesnt fit with the look Im trying to go for.
Once it is removed, are there supposed to be pieces to cover the rack bolt holes? I've never seen a buddy without a rack, so Im not sure if I am missing pieces or if I have everything I need to remove the rack and still look stock.
Any input would be appreciated!
Once it is removed, are there supposed to be pieces to cover the rack bolt holes? I've never seen a buddy without a rack, so Im not sure if I am missing pieces or if I have everything I need to remove the rack and still look stock.
Any input would be appreciated!
- Tocsik
- Member
- Posts: 1918
- Joined: Mon Jun 02, 2008 8:40 pm
- Location: Denver
The front cowl has pre-stamped cutouts that are removed to add the front rack. When you remove the rack, you'll have to cover the holes with something. You can buy hole plugs at hardware stores or do some bodywork and painting with Bondo or buy a replacement front cowl from Scooterworks or Scooterlounge.
The other option is come up with something creative for those holes that may go with the look you are aiming for. Keep in mind there's not much room behind the cowl for wiring or anything since those holes line up with a nice steel plate that's part of the front fork/frame assembly.
The other option is come up with something creative for those holes that may go with the look you are aiming for. Keep in mind there's not much room behind the cowl for wiring or anything since those holes line up with a nice steel plate that's part of the front fork/frame assembly.
- michelle_7728
- Member
- Posts: 1914
- Joined: Fri Jun 12, 2009 2:16 am
- Location: Renton, WA
Hey, you could really have some FUN with this!
Seriously though, the cleanest thing would be to just order another front cover and swap it out. They're not too pricy and it would look stock again.

Seriously though, the cleanest thing would be to just order another front cover and swap it out. They're not too pricy and it would look stock again.
- tommyred
- Member
- Posts: 132
- Joined: Wed Feb 02, 2011 3:07 am
- Location: Santee, San Diego County, CA
Re: Remove Front Rack
What are you going to do with the rack? I was looking to get one for my Buddy.walke2jd wrote:I have a buddy that came with a front rack. I would like to remove the rack as it doesnt fit with the look Im trying to go for.
The Reverend Wage
Ordained Dudeist Priest ☯�
Abide!
Ordained Dudeist Priest ☯�
Abide!
-
- In Time Out
- Posts: 85
- Joined: Thu Aug 09, 2012 6:54 pm
- tommyred
- Member
- Posts: 132
- Joined: Wed Feb 02, 2011 3:07 am
- Location: Santee, San Diego County, CA