Bringing it home
Moderator: Modern Buddy Staff
- dubbylove
- Member
- Posts: 31
- Joined: Sun Dec 02, 2007 6:54 am
- Location: Mukilteo, WA
Hey Ninja - congrats! Glad to hear you made arrangement for the dealer to deliver it for you. I had the same problem. The dealer I got mine from was 230 miles away. But the owner was really nice and decided to delivered to my house in person. Man - that's what I call great customer service. I thought I share some photos on how it was loaded on to his truck. Have fun with it!
- Attachments
-
- DSC_0010.jpg (111.78 KiB) Viewed 1957 times
-
- DSC_0009.jpg (113.23 KiB) Viewed 1957 times
-
- b1.jpg (105.34 KiB) Viewed 1957 times
-
- Member
- Posts: 63
- Joined: Fri Nov 23, 2007 8:34 pm
- Location: Huntsville, AL
I'll be curious to see how they load it in an Explorer. I brought mine home in a van - and I had the back and one of the 2nd row of seats removed to do it. And had to remove the rearview mirrors - but that was easy.
Good luck - and congrats on your new scooter, Ninja. And may I suggest that first on your list of things to buy be the helmet?
Good luck - and congrats on your new scooter, Ninja. And may I suggest that first on your list of things to buy be the helmet?
Beth
-
- Member
- Posts: 235
- Joined: Fri Aug 31, 2007 12:08 pm
- Location: Chicago
- The Ninja
- Member
- Posts: 107
- Joined: Sun Dec 16, 2007 7:06 pm
- Location: Charlotte, NC
The low temps get down into the high 20s right now. Sometimes it is in the 30s for lows and on rare occasions it is in the teens. I think we will have about another month of this.
For now I may be running it everyday to get practice. vWe have a large complex where I can ride without getting on any main roads.
For now I may be running it everyday to get practice. vWe have a large complex where I can ride without getting on any main roads.
-
- Member
- Posts: 235
- Joined: Fri Aug 31, 2007 12:08 pm
- Location: Chicago
Main thing is that you will need to run it enough to charge the battery. I cannot tell you exactly what figure that is, but idle, and I suspect just running it in a parking lot type situation is not enough. I have read elsewhere on the forum a little more about that but cannot look for that now…
If you are running it enough to keep the battery charged, then I would not even worry about a tender.
But all in all, a battery tender should never hurt your battery, and taking the battery out of the Buddy is easy and I would say that you are not going to hurt anything no matter how often you do that. Just don’t want you to do it more than necessary.
If you are running it enough to keep the battery charged, then I would not even worry about a tender.
But all in all, a battery tender should never hurt your battery, and taking the battery out of the Buddy is easy and I would say that you are not going to hurt anything no matter how often you do that. Just don’t want you to do it more than necessary.
-
- Member
- Posts: 63
- Joined: Fri Nov 23, 2007 8:34 pm
- Location: Huntsville, AL
You don't need to take the battery out of the Buddy to use the tender if you have electric.
I just hooked mine up from the bottom - and don't even need to open the battery compartment now. Just plug in the battery tender at the scooter (underneath) and into electric.
Got my scoot with a battery not strong enough to start it - the batttery tender is great. Of course, if you ride every day- you shouldn't ever need one, but if you don't, it's not expensive and, to me, worth every penny.
I just hooked mine up from the bottom - and don't even need to open the battery compartment now. Just plug in the battery tender at the scooter (underneath) and into electric.
Got my scoot with a battery not strong enough to start it - the batttery tender is great. Of course, if you ride every day- you shouldn't ever need one, but if you don't, it's not expensive and, to me, worth every penny.
Beth
- The Ninja
- Member
- Posts: 107
- Joined: Sun Dec 16, 2007 7:06 pm
- Location: Charlotte, NC
Well the Buddy is safely hone. The shop owner dropped it off at around 7:00. We rode it around the complex a few timestimes before putting it up for the new. There are a few issues.
1. When the guy left it took my girlfriend and I a good minutes to start it. Turns out we were doing everything right except pressing the start button. OOPS.
2. I didn't think to get a lock of any sort. thankfully the guy brought a spare and sold it to me for $30. It is a really good one.
3. There is no where great to park in the apartment complex. No poles in the parking lot. The only thing I could do was drive up a handicapped ramp to the sidewalk and lock it to a handicapped post. I tried my best to not block the sidewalk. I am sure my neighbors will hate me though.
4. The BIG problem. How in the work do i put it up on the central staqnd. Right now I have it on the kick stand with the fork locked. While it is stable I still would rather have it on the central stand.
Any help would be great. Pictures tomorrow after work.
1. When the guy left it took my girlfriend and I a good minutes to start it. Turns out we were doing everything right except pressing the start button. OOPS.
2. I didn't think to get a lock of any sort. thankfully the guy brought a spare and sold it to me for $30. It is a really good one.
3. There is no where great to park in the apartment complex. No poles in the parking lot. The only thing I could do was drive up a handicapped ramp to the sidewalk and lock it to a handicapped post. I tried my best to not block the sidewalk. I am sure my neighbors will hate me though.
4. The BIG problem. How in the work do i put it up on the central staqnd. Right now I have it on the kick stand with the fork locked. While it is stable I still would rather have it on the central stand.
Any help would be great. Pictures tomorrow after work.
- hcstrider
- Member
- Posts: 308
- Joined: Mon Aug 06, 2007 5:07 pm
- Location: Ellicott City, MD
This is the way that I park my Buddy on its centerstand. I position myself on the left side of the scooter with my left hand holding the left grip while my right hand is holding the rear rack. I make sure that the Buddy is not leaning to either the left or the right so that both the left and right pegs of the centerstand will contact the ground at the same time. Then with my right foot I press down on the centerstand lever. It is important that while you are pressing down on the centerstand lever you don't allow the Buddy to lean towards you (left) or away from you (right) because both the left and right pegs of the centerstand should make contact with the ground at the same time.The Ninja wrote:4. The BIG problem. How in the work do i put it up on the central staqnd. Right now I have it on the kick stand with the fork locked. While it is stable I still would rather have it on the central stand.
Wayne
The safest rule, no ifs or buts
Just drive like everyone else is nuts! (Burma Shave)

The safest rule, no ifs or buts
Just drive like everyone else is nuts! (Burma Shave)

- jmazza
- Moderator
- Posts: 2960
- Joined: Tue Dec 11, 2007 10:03 pm
- Location: Broomfield, CO
Yup, that's the way! The centerstand provides much more stability than the kickstand - definitely figure it out and use it!!hcstrider wrote:This is the way that I park my Buddy on its centerstand. I position myself on the left side of the scooter with my left hand holding the left grip while my right hand is holding the rear rack. I make sure that the Buddy is not leaning to either the left or the right so that both the left and right pegs of the centerstand will contact the ground at the same time. Then with my right foot I press down on the centerstand lever. It is important that while you are pressing down on the centerstand lever you don't allow the Buddy to lean towards you (left) or away from you (right) because both the left and right pegs of the centerstand should make contact with the ground at the same time.The Ninja wrote:4. The BIG problem. How in the work do i put it up on the central staqnd. Right now I have it on the kick stand with the fork locked. While it is stable I still would rather have it on the central stand.
- The Ninja
- Member
- Posts: 107
- Joined: Sun Dec 16, 2007 7:06 pm
- Location: Charlotte, NC
Thanks everyone for the advice. I will try that tonight. I didn't even ride last night.
My girlfriend is in grad school and we have a puppy, so I was on daddy duty last night. I will be so happy when the puppy is older and doesn't need to be watched like a hawk.
The girlfriend has class tonight so i am going to cage the dog and ride a bit.
I ended up getting a tarp and bungees since we were going to have rain. That worked extremely well. A good fix until I get a real cover.
I did snap a quick photos last night, but it was dark and they didn't turn out well.

The girlfriend has class tonight so i am going to cage the dog and ride a bit.
I ended up getting a tarp and bungees since we were going to have rain. That worked extremely well. A good fix until I get a real cover.
I did snap a quick photos last night, but it was dark and they didn't turn out well.
- Drumwoulf
- Member
- Posts: 810
- Joined: Mon Jan 01, 2007 6:49 pm
Re: Bringing it home
Bought miy 2007 125cc Buddy from a dealer 65 miles away. (Phjiladelphia Scooters). Riding it home would've consisted of high speed hiways and several high and fast bridges... Not the best venues even for a 125 scoot, never mind a 50cc! Dealer delivered, explained operation at a final setup, at no extra charge!The Ninja wrote:I pick up my Buddy 50 next Saturday. I am not sure how I am going to bring it home. I already need to have a friend bring me, but his car has even less room then mine. I am a bit worried about driving it home. It is roughly 8 miles through city streets.
How did other new riders get their Scooters home?
Namaste,
~drummer~
07 Buddy 125
07 Vespa GT200
~drummer~
07 Buddy 125
07 Vespa GT200
- Drumwoulf
- Member
- Posts: 810
- Joined: Mon Jan 01, 2007 6:49 pm
That cable you got around the front wheel looks like it could be cut easily by a large pair of cutting pliers... If you live in a rougher city neighborhood I would get something stronger than that!The Ninja wrote:It took me long enough, but here's a photo. Sorry I have been too busy to take some good photos.
It's also a good idea to lick up a cheap cover for it; out of sight under a cover seems to also help prevent theft, and definitely helps prevent kids from messing with the controls and such!
Namaste,
~drummer~
07 Buddy 125
07 Vespa GT200
~drummer~
07 Buddy 125
07 Vespa GT200
- The Ninja
- Member
- Posts: 107
- Joined: Sun Dec 16, 2007 7:06 pm
- Location: Charlotte, NC
- Lisa I
- Member
- Posts: 33
- Joined: Mon Jan 14, 2008 9:44 pm
- Location: New Mexico