Problem with buddy 50
Moderator: Modern Buddy Staff
-
- Member
- Posts: 19
- Joined: Tue May 12, 2015 12:58 am
Problem with buddy 50
I went to turn my scooter on tonight, and it made a sort of lower pitched alarm noise right as I switched it on and the hazard lights were blinking with clicking noises. The engine wasn't turned on, just when i turned the key to "on". Can someone tell me what's up?
- VSP
- Member
- Posts: 103
- Joined: Tue May 01, 2012 5:03 pm
Re: Problem with buddy 50
When the battery gets low, the flasher relay will make that clicking noise when the hazards or blinkers are activated. Check your battery voltage. If it's below about 12.4 volts and you have a battery tender or charger, hook it up ASAP. A healthy battery will read about 12.7 volts when the scooter is off.Jackie103 wrote:the hazard lights were blinking with clicking noises.
If you don't have a tender, kick start then go for a long ride at high speeds to a store that sells battery chargers

Voodoo [voo-doo] -adjective. Claimed or reputed to provide an ingenious or seemingly magical solution to a problem. <A HREF="http://www.modernbuddy.com/forum/topic29569.html">Get your VOODOO here</A>