Hi All,
I looked for a thread on this but did not find one. So, I turn to you for some info. I have a Buddy Italia 50cc. I bought grips from a Pamplona and will put on my scoot to match better in color. Thanks for the help.
Amigo
Buddy 50CC Grip Installation
Moderator: Modern Buddy Staff
-
[email protected]
- Member
- Posts: 21
- Joined: Fri Nov 20, 2009 4:19 pm
- Location: Seattle, WA
-
jasondavis48108
- Member
- Posts: 2919
- Joined: Fri Apr 24, 2009 12:36 pm
- Location: Ann Arbor
I used an air compressor to push air under the grip to make it easier to slide off. It was still a bit of a pain due to the grip glue they used. Without the air compressor I don't think I would have been able to get them off.
"Only the curious have, if they live, a tale worth telling at all" Alastair Reid
-
JoshInLA
- Member
- Posts: 23
- Joined: Sun Feb 14, 2010 8:51 pm
- Location: LA
I used to be a bicycle mechanic, and if there is one thing that seems to be the same it's grips. If you do not have an air compressor, wedge something between the bar and grip and shoot some windex in there. It'll slide right off. To put the new ones on just spray some more windex in the grips and slide on. They will move around for a little bit, but once the windex dries they will stay put.