Page 1 of 1
Voodoo Scooter Parts is 'indefinitely closed'?
Posted: Sun Jul 01, 2012 2:18 am
by pinthea
I swear I was just on their website on Friday; they have those great wiring harnesses for doing the deadlight conversion and rear brake light modulation; today their website says 'indefinitely closed', anyone have any insights?
Posted: Sun Jul 01, 2012 3:04 am
by Dooglas
Posted: Sun Jul 01, 2012 4:51 am
by Demo_Nic
I PMed Ethan directly last week for my brake light. It should be here by Monday or Tuesday. I'm saving up for the BoB combo.
Posted: Sun Jul 01, 2012 2:51 pm
by VSP
Although you can no longer order products from VoodooScooterParts.com you can get them through me directly. Feel free to PM with any questions or to place an order.
Ethan
Posted: Tue Jul 10, 2012 5:45 pm
by Grant H
I'm glad to have found this post. Let me figure out what I want exactly Ethan and I'll be getting back to you shortly.
If I wanted to go all LED lights all around on a Buddy 170i, what bulbs would you suggest?
Posted: Tue Jul 10, 2012 5:53 pm
by pinthea
I just placed an order from the superbrightleds.com website for these bulbs for my Buddy 170i. I may be sorely disappointed that maybe they don't fit or are too bright or whatever, but here you go. I'll post my results when I get them installed and get a chance to run 'em in.
I have the universal flasher relay on order as well, along with some of the cable harnesses.
2 | 1156-x45-T: 45HP-LED BA15S Tower Bulb | $ 24.95 ea |
1156-WW45-T: 1156 Warm White
------------------------------------------------------------
2 | 1156-x45-T: 45HP-LED BA15S Tower Bulb | $ 24.95 ea |
1156-A45-T: 1156 Amber
------------------------------------------------------------
2 | 1156-x45-T: 45HP-LED BA15S Tower Bulb | $ 24.95 ea |
1156-R45-T: 1156 Red
------------------------------------------------------------
First line item, for the dead lights to become white running lights.
Second line item, for the amber front turn signals
Third line item, for the red rear turn signals
These bulbs were attractive because of their wide voltage tolerances (up to 30v) as well as reports of them being plenty bright enough.
Stay tuned!
Posted: Tue Jul 10, 2012 6:36 pm
by VSP
pinthea wrote:Second line item, for the amber front turn signals
Those won't work for the DOT blinkers. You need a bulb with a BAU15s base for that location. It will give you a great opportunity to compare the brightness in the deadlight location though!
The bulbs I like for each location is as follows:
Deadlights: 1156-x45-T: 45HP-LED BA15S Tower Bulb ($ 24.95 ea) from superbrightleds.com
DOT blinkers: 7507 PY21W European Bulbs ($12.99 ea) from autolumination.com
Rear blinkers: Jamstrait LED bulbs
http://www.autozone.com/autozone/access ... 43446_0_0_
Posted: Tue Jul 10, 2012 7:25 pm
by Skootz Kabootz
I'm so glad the adapters are still available for everyone. I absolutely love my running lights, both for the safety factor and for lighting up the road directly in front of the scooter. They really are a great product—especially for those of us who don't want to get all hands on electrical and stuff.
Posted: Tue Jul 10, 2012 9:40 pm
by bgwss
I agree I drive early in the morning I love that I have my running lights burning bright!
Posted: Tue Jul 10, 2012 10:37 pm
by pinthea
VSP wrote:pinthea wrote:Second line item, for the amber front turn signals
Those won't work for the DOT blinkers. You need a bulb with a BAU15s base for that location. It will give you a great opportunity to compare the brightness in the deadlight location though!
Sigh.
Thanks for the info, I'll be sure to buy suitable DOT LEDs based on your recommendations!
I guess now I can also decide whether to use the amber bulbs I just purchased for the DOTs (which won't fit) as the deadlight bulbs in case I don't like the white color I ordered... Good to have options...
Posted: Thu Jul 26, 2012 6:58 pm
by Grant H
I should be getting my BOB here soon! Just got a pm from VSP.
Posted: Thu Jul 26, 2012 7:16 pm
by Tocsik
VSP wrote:pinthea wrote:Second line item, for the amber front turn signals
Those won't work for the DOT blinkers. You need a bulb with a BAU15s base for that location. It will give you a great opportunity to compare the brightness in the deadlight location though!
The bulbs I like for each location is as follows:
Deadlights: 1156-x45-T: 45HP-LED BA15S Tower Bulb ($ 24.95 ea) from superbrightleds.com
DOT blinkers: 7507 PY21W European Bulbs ($12.99 ea) from autolumination.com
Rear blinkers: Jamstrait LED bulbs
http://www.autozone.com/autozone/access ... 43446_0_0_
Yikes! $150 just to go to LED's?!
PM Sent
Posted: Tue Jul 31, 2012 5:18 pm
by swillscooter
VSP, I sent a PM, but it it doesn't appear in my sent folder, it's just sitting in the outbox. Is there another way to contact you?
Re: PM Sent
Posted: Tue Jul 31, 2012 11:30 pm
by ericalm
swillscooter wrote:VSP, I sent a PM, but it it doesn't appear in my sent folder, it's just sitting in the outbox. Is there another way to contact you?
This just means it hasn't been read yet.
Posted: Wed Aug 01, 2012 12:14 am
by swillscooter
Learn something new every day...thanks, Eric.