Modern Buddy

in my constant search for parts, i find a bunch for the 150

will those fit on a 125?

im pretty sure a lot of panels are interchangeable, but id like a little more info on the subject

thanks in advance

I am 98% sure that the panels are interchangeable. Most of the other parts are, too. You can always look at the scooterworks or scooterwest website and see if the part is sold for both.

The body parts from 2007-onwards will all be interchangeable. If you have an '06 125, the headlight and tail light are smaller.

Most other parts with exception of the engine and oil cooler are the same as well.

Here's a list of performance parts that fit the Buddy. It's not exactly what you are asking, but there is some very good information when you read through the posts on aftermarket parts and compatibility. Even some info on the tooth count on the cams between the 125 and 150.

Pretty much everything except some of the top end engine internals are interchangeable between the 125 and 150. Many parts are even interchangeable with the Buddy 50cc (mostly body parts).

ericalm wrote:The body parts from 2007-onwards will all be interchangeable. If you have an '06 125, the headlight and tail light are smaller.

The tail lights are interchangeable, the newer one is just brighter (better)