Page 1 of 1
Front turn indicator
Posted: Mon Dec 26, 2016 9:26 pm
by exmayor
New to the site and am considering a Buddy 125 in the spring and was wondering if it is possible to wire the lights in the front cowlmas indicators and remove the ones under the handle bars.
Posted: Mon Dec 26, 2016 10:03 pm
by exmayor
Found answer voodoo scooter parts adapter
Posted: Mon Dec 26, 2016 10:19 pm
by DeeDee
The wiring harness to do this is already under the front panel. You simply unplog the DOT signals, and plug in the cowl signals. Very simple to do. No extra parts needed.
Posted: Wed Dec 28, 2016 1:32 am
by cummingsjc
exmayor wrote:Found answer voodoo scooter parts adapter
The Voodoo Scooter Parts "deadlights" adapters allow you to utilize the deadlights and existing DOT front turn signals at the same time in various ways (both together, one as running lights and the other as turn signals, etc) depending on which adapter you get. The electrical adapters are great products, as are the brake light modulators.
As DeeDee already stated, the wiring harness for the existing lights are easily rerouted to the deadlights if all you desire is to delete the DOT blinkers.
Posted: Wed Dec 28, 2016 5:30 pm
by exmayor
Thank you
Posted: Wed Dec 28, 2016 5:32 pm
by exmayor
Thank you