Modern Buddy

I talking about the little white connectors that are used to plug into the dead lights. I don't need the wires (I didn't cut that piece off and lose it), I just need the white, red, black little 2 and 4 pin male and female connectors. I understand I could slay a wiring job together with a bunch of cool butt connectors, but I really like uniformity and would prefer to use the same kind. Where can I get them?

When I was in Phoenix on a job at Motorola many years ago, there were at least a couple of electronics surplus parts stores there. You might want to look for any that are still around either through the Yellow pages or online.

If what you want are connectors that match those used in scooters and motorcycles, then try Cycleterminal: http://cycleterminal.com/

If that fails, try Digikey electronics (www.digikey.com) or Mouser (http://www.mouser.com), but these will be standard industrial type connectors such as Molex and Amp.

Check Frys Eletronics. They have everything.

I got mine on eBay. They are .110" connectors. Here's a sample search: http://www.ebay.com/sch/i.html?_from=R4 ... r&_sacat=0