Cheap "Rejet" for ECU bikes

Discussion of the Genuine Buddy, Hooligan, Black Jack and other topics, both scooter related and not

Moderator: Modern Buddy Staff

Post Reply
User avatar
wheelbender6
Member
Posts: 855
Joined: Sun Jul 07, 2013 1:27 am
Location: Houston area

Cheap "Rejet" for ECU bikes

Post by wheelbender6 »

There are many bikes and scoots with ECUs for which no "tuner" device is available, like the Buddy and Hooligan 170s.
I have read on some other sites that using inexpensive potentiometers (rheostats) can accomplish similar results.

You can install one of these potentiometers in your air intake temp wire and richen the air/fuel ratio back toward the optimum 14:1.
https://www.amazon.com/exec/obidos/ASIN ... efuge08-20

Another trick is to add a resister in your wire from your O2 sensor. That will also trick the ECU into richening the mixture.

None of these tricks alone add power. They are intended to prevent lean conditions after you add performance exhausts, intakes and other power boosters.
2013 Buddy 125, Prima Pipe, #95 main jet, Orange CDI
Post Reply