Page 1 of 1
Rear Axle nut torque specs
Posted: Thu Sep 15, 2022 7:11 pm
by SnowATree
I've looked in the manual but cannot find the torque recommendation for the rear and front axle nut torque requirements. Anyone have values they've been going by?
90 ft-lbs?
Re: Rear Axle nut torque specs
Posted: Thu Sep 15, 2022 10:53 pm
by scootERIK
Rear 11-13 kg/m which is about 80-95 ft/lb
Front 4.5-5.5 kg/m which is about 32.5-40 ft/lb
Page 9-
http://www.modernbuddy.com/pdf/buddy125 ... manual.pdf
Re: Rear Axle nut torque specs
Posted: Fri Sep 16, 2022 12:21 am
by SnowATree
Dang I've been looking at the owners manual and not this golden PDF, thanks Erik
Re: Rear Axle nut torque specs
Posted: Sat Sep 17, 2022 1:32 am
by zino
mark the nut before you take it off with a permanent marker from the center of the shaft to the outer edge of the nut and then snug it back to the same spot
this is also a good way to at a glance make sure that your nuts are snugged up on variator ,clutch, exhaust ,tires