I have a 2012 Stella 4T 150
Everything has been running great lately, I had a clutch cable snap a couple days ago and I ran a new one through.
Since then, I seem to have a weird issue.
It seems that in 4th gear, it boggs down almost like its flooded?
Then it gets tough to start right after I shut it off.
Any ideas?
Bogging down in 4th
Moderator: Modern Buddy Staff
-
- Member
- Posts: 12
- Joined: Fri Apr 15, 2016 7:07 pm
- Location: Victoria BC Canada
-
- Member
- Posts: 127
- Joined: Sat Dec 27, 2014 7:12 am
- Location: TX, USA
- Contact:
- jimmbomb
- Member
- Posts: 801
- Joined: Fri May 20, 2011 1:00 am
- Location: St Louis
-
- Member
- Posts: 31
- Joined: Wed Sep 27, 2017 6:38 pm
- Location: Princeton, NJ
- jimmbomb
- Member
- Posts: 801
- Joined: Fri May 20, 2011 1:00 am
- Location: St Louis
I am sad to say, that it is possible, that it is running full out at 40 to 45 miles an hour. That's one of the reasons I got rid of my 2010 for stroke, because it was a pooch. It was slower than molasses and it ran great, it was just too damn slow.
I put on a straight pipe rejected the carburetor and it didn't do any difference except made it a little louder.
If you want speed, get you a p 200 2 stroke.
The transmission is geared different and you will do 60-65 miles an hour easy.
I put on a straight pipe rejected the carburetor and it didn't do any difference except made it a little louder.
If you want speed, get you a p 200 2 stroke.
The transmission is geared different and you will do 60-65 miles an hour easy.