My Stella was running a bit rough on Monday, tried to start her up Tuesday and no luck...
No electrical - AT ALL; turn the key, hit the ignition switch and... nothing. No lights or horn.
New-ish battery, fluids are good, swapped out spark plug; fuses seem ok but not sure how to access them as the user manual I have is for a Vespa 125 (gasp)...
Fuses are the next logical step, right?
Please help!
No Electrical - please help!
Moderator: Modern Buddy Staff
-
- Member
- Posts: 2
- Joined: Sat Jul 27, 2013 3:03 am
- Location: Seattle
-
- Member
- Posts: 24
- Joined: Tue Aug 02, 2011 11:57 pm
- Location: Holland, MI
-
- Member
- Posts: 2
- Joined: Sat Jul 27, 2013 3:03 am
- Location: Seattle
-
- Member
- Posts: 24
- Joined: Tue Aug 02, 2011 11:57 pm
- Location: Holland, MI
remember when a fuse blows it blows for a reason. usually.
first thing i would check is the charging voltage. put a multimeter across the battery terminals when the engine is running. rev the engine, the voltage shouldn't rise above 14.4 vdc. if it does you found your reason and order up a new regulator.
first thing i would check is the charging voltage. put a multimeter across the battery terminals when the engine is running. rev the engine, the voltage shouldn't rise above 14.4 vdc. if it does you found your reason and order up a new regulator.
"What you have is one or more diodes that are about to fail."