Backrest, will it work
Moderator: Modern Buddy Staff
-
- Member
- Posts: 12
- Joined: Fri Apr 15, 2016 7:07 pm
- Location: Victoria BC Canada
Backrest, will it work
Does anyone know if this will fit a 2012 Stella 150 4t
https://www.thescooterrepublic.co.uk/ve ... -vlb-p1237
https://www.thescooterrepublic.co.uk/ve ... -vlb-p1237
- phunksoulbrotha
- Member
- Posts: 25
- Joined: Thu Aug 06, 2015 10:58 pm
- Location: Down the Rabbit Hole
It looks like the cross bar with the 4 holes is going to land right around the same spot the catchment pin for your seat is located on your bike. I bet you have to mod it a little but it shouldn't be hard. I ordered their Zero Cafe Racer seat and had to do a fair bit of grinding and cutting to make it fit my 4t but it was worth every penny.
- phunksoulbrotha
- Member
- Posts: 25
- Joined: Thu Aug 06, 2015 10:58 pm
- Location: Down the Rabbit Hole
- jimmbomb
- Member
- Posts: 801
- Joined: Fri May 20, 2011 1:00 am
- Location: St Louis
Yours is a 2t... his is a 4t.... slotrods is a 4t.teamhurst wrote:nope no modes it went right on just had to tune the latch pin up a thread or to . out of box on to scoot no problems at all took 5 mins
Just wallow out the holes with a larger drill bit and it should work out. Maybe.
But, if you dont have tools and are not too handy, then maybe youde better not try, unless you get someone who is to help you.
Good luck
J H
[URL=https:///][/URL] upload pics
[URL=https:///][/URL] upload pics