Page 1 of 1
Polini Exhaust for LML 125/150 4T
Posted: Wed Jun 29, 2016 6:51 pm
by srbbnd
Posted: Thu Jun 30, 2016 12:18 am
by jimmbomb
Here's my experience with it and a first year 2010 Stella 4t
viewtopic.php?t=18745&highlight=polini
Good luck deciding
Posted: Fri Jul 01, 2016 3:12 am
by srbbnd
Awesome thanks!
Posted: Tue Jul 12, 2016 1:27 am
by viney266
I have installed and stock the GPR and I really like it. Check into it as well.
Posted: Tue Jul 12, 2016 7:54 pm
by Stilts
I second the GPR exhaust.
Posted: Sun Jul 17, 2016 12:19 am
by jimmbomb
Any-1 here do a write up and photos of the GPR? I must have missed them.links, anybody?
Thanks
Posted: Sun Jul 17, 2016 3:38 am
by phunksoulbrotha
Slotrod65 gives a nice little write-up of the GPR in this thread:
viewtopic.php?t=26301&highlight=gpr+exhaust
Starts about halfway down the first page.
On another note, I just got done with the airbox chop/pod filter install, in addition to adding the Polini carb package and the new V3 exhaust from Tasso. Hoping to put it through it's paces tomorrow as I've just had time to cruise around town since the install but initial impressions are good. I'll try to give some detail tomorrow so the OP has one more exhaust to consider.
Posted: Sun Jul 17, 2016 1:22 pm
by jimmbomb
phunksoulbrotha wrote:Slotrod65 gives a nice little write-up of the GPR in this thread:
viewtopic.php?t=26301&highlight=gpr+exhaust
Starts about halfway down the first page.
On another note, I just got done with the airbox chop/pod filter install, in addition to adding the Polini carb package and the new V3 exhaust from Tasso. Hoping to put it through it's paces tomorrow as I've just had time to cruise around town since the install but initial impressions are good. I'll try to give some detail tomorrow so the OP has one more exhaust to consider.
Very nice, thanks..
We're all anxious to see your write up on those mods.
Check it out, now, Funk SB