Rat Rod Build
Posted: Mon Jul 18, 2016 2:24 am
I wanted to put a thread up consisting of my current mods and possible additions for the future. It may also serve as a general Q & A for anyone that wishes to know how I did anything (although most of it is fairly well documented either here or on the LMLOCGB forum).
I got this bike last summer with 700 miles on it and it had been garaged the rest of the time. It is my daily driver and now has 3000 on her after a year in my hands. It is my first scooter I've owned and has been a blast to mod and even more fun to cruise around on. She's a sleeper and catches most people off guard. Even my Harley buddies are blown away at how capable and torquey this little 4T 150 is.
Current list of mods:
De-badged
Disabled blinker noise
LED Tail light, Brake light, Turn signals and Solid state relay to keep flashing at a normal rate.
PIAA H4 Headlight bulb
Continental Whitewalls 3.50x10 (need to pick up a 3rd for the spare)
Prima Front Rack
Removed stock mirrors and mounted retro Motorcycle mirror to Prima Rack
TSR Zero Cafe Racer Seat (a good deal of grinding and cutting to get it to fit)
Lambretta Series 3 S-Type Sprint Rack (custom fit to seat)
Brisk High Performance Motor Cycle Spark Plug
Tasso High Power Coil
Airbox chop/K&N pod filter install
Polini 22mm Carb Kit install
Tasso RIP Race Exhaust V3 (Left Side)
Future mods:
Stebel Nautilus mounted under rear cowl where airbox was.
Paint (Dark Grey Body, Red Wheels, Chrome Accents)
Malossi Big Bore Kit (still undecided)
Drop bars from SIP
Touring Rack addition piece for Sprint Rack
Fuel Canister(s) with Leather Holster (still working up mounting ideas)
A big shout out to many of the members here that added photos and write-ups for some of these mods. I know next to nothing about engines (or didn't when I started) and this has all been a learning experience. Thank you.
I got this bike last summer with 700 miles on it and it had been garaged the rest of the time. It is my daily driver and now has 3000 on her after a year in my hands. It is my first scooter I've owned and has been a blast to mod and even more fun to cruise around on. She's a sleeper and catches most people off guard. Even my Harley buddies are blown away at how capable and torquey this little 4T 150 is.
Current list of mods:
De-badged
Disabled blinker noise
LED Tail light, Brake light, Turn signals and Solid state relay to keep flashing at a normal rate.
PIAA H4 Headlight bulb
Continental Whitewalls 3.50x10 (need to pick up a 3rd for the spare)
Prima Front Rack
Removed stock mirrors and mounted retro Motorcycle mirror to Prima Rack
TSR Zero Cafe Racer Seat (a good deal of grinding and cutting to get it to fit)
Lambretta Series 3 S-Type Sprint Rack (custom fit to seat)
Brisk High Performance Motor Cycle Spark Plug
Tasso High Power Coil
Airbox chop/K&N pod filter install
Polini 22mm Carb Kit install
Tasso RIP Race Exhaust V3 (Left Side)
Future mods:
Stebel Nautilus mounted under rear cowl where airbox was.
Paint (Dark Grey Body, Red Wheels, Chrome Accents)
Malossi Big Bore Kit (still undecided)
Drop bars from SIP
Touring Rack addition piece for Sprint Rack
Fuel Canister(s) with Leather Holster (still working up mounting ideas)
A big shout out to many of the members here that added photos and write-ups for some of these mods. I know next to nothing about engines (or didn't when I started) and this has all been a learning experience. Thank you.