SECURITY/LOCKS: New York Noose Chain Lock
Moderator: Modern Buddy Staff
- redcass
- Member
- Posts: 336
- Joined: Mon Aug 27, 2007 3:34 am
- Location: philadelphia, pa
SECURITY/LOCKS: New York Noose Chain Lock
For day-to-day locking purposes I use a Keeper 5 disc lock (with reminder cord!), but I wanted something more substantial for overnight use.
So I purchased a 4.25 foot Kryptonite New York Noose, and it works really well. The chain is very heavy, so I travel with it under the seat. I have wrapped the noose around gates, poles, parking meters, and anywhere else I can find a secure place to wrap it. I tighten the noose as much as possible. Then, following the suggestion of another MB-er, I put the U part of the lock around the top of my rear shock, put a chain link over it, and then secure the lock. The main key comes with a little LED light to help with locking or unlocking in poorly lit areas. I used this lock in a bunch of different places in my home town in central IL and in Chicago, and nobody touched my scooter. (But of course I also have insurance!)
Because of this chain’s weight, I wouldn’t use it every day. But it gives me some extra piece of mind when I’m on the road and need to leave my scooter outside overnight, or in a high/moderate crime area after dark. The noose design really makes this chain lock work like a typical chain that is much longer—well worth the money, in my opinion. If anybody else has this lock, I’d love to hear any other ideas for how to secure it to your scooter. The shock works well, but I’m also open to other thoughts!
RedCass
So I purchased a 4.25 foot Kryptonite New York Noose, and it works really well. The chain is very heavy, so I travel with it under the seat. I have wrapped the noose around gates, poles, parking meters, and anywhere else I can find a secure place to wrap it. I tighten the noose as much as possible. Then, following the suggestion of another MB-er, I put the U part of the lock around the top of my rear shock, put a chain link over it, and then secure the lock. The main key comes with a little LED light to help with locking or unlocking in poorly lit areas. I used this lock in a bunch of different places in my home town in central IL and in Chicago, and nobody touched my scooter. (But of course I also have insurance!)
Because of this chain’s weight, I wouldn’t use it every day. But it gives me some extra piece of mind when I’m on the road and need to leave my scooter outside overnight, or in a high/moderate crime area after dark. The noose design really makes this chain lock work like a typical chain that is much longer—well worth the money, in my opinion. If anybody else has this lock, I’d love to hear any other ideas for how to secure it to your scooter. The shock works well, but I’m also open to other thoughts!
RedCass
RedCass
- siobhan
- Member
- Posts: 1344
- Joined: Thu May 01, 2008 5:47 pm
- Location: Providence, RI
- Contact:
I'm partial to the center stand. I have a similar chain lock and it can be a pain getting it through the small space between the bottom of the scoot and the stand, but it'd sure be a pain to undo for a thief.
When I picked up the scoot, a bunch of us stood in the showroom (shop mechanics, salespeople and the shop owner) deciding where was the best place to lock and that's what we came up with.
When I picked up the scoot, a bunch of us stood in the showroom (shop mechanics, salespeople and the shop owner) deciding where was the best place to lock and that's what we came up with.
Fahr mit mir!
http://scootcommute.wordpress.com/
http://scootcommute.wordpress.com/
- Lostmycage
- FAQ Moderator
- Posts: 4062
- Joined: Tue Jun 17, 2008 3:36 am
- Location: The Interwebz!
I've got the OnGuard Mastiff (same thing - beefy hex/reinforced noose chain covered in a heat resistant sleeve with U-lock, roughly 4' in length). I feel that if they get that thing off, they deserve a joy-ride. Well, that and they have a $700 reimbursement policy (more than my deductible) if it fails to prevent a theft. With either brand, I think it's a safe bet, these things are beefy!
One thing I wanted to mention: I prefer the center stand as well, however (and I missed this the first time I looked) make sure to slip the U-lock over the thick welded portion and not the slightly skinner bar below the attachment bolts. It's harder to see, but I think that's the most secure place to lock it to; being the frame of the scooter and all. Also, it's just another good reason to wear gloves, as the first few times you lock it there right after a ride, you'll most likely brush the backs of your fingers - HOT!! Just my 2 cents, but I'd take these locks over a cable lock any day of the week.
One thing I wanted to mention: I prefer the center stand as well, however (and I missed this the first time I looked) make sure to slip the U-lock over the thick welded portion and not the slightly skinner bar below the attachment bolts. It's harder to see, but I think that's the most secure place to lock it to; being the frame of the scooter and all. Also, it's just another good reason to wear gloves, as the first few times you lock it there right after a ride, you'll most likely brush the backs of your fingers - HOT!! Just my 2 cents, but I'd take these locks over a cable lock any day of the week.
Check out Scoot Richmond's new site: My awesome local shop.
- polianarchy
- Moderator
- Posts: 2163
- Joined: Mon Dec 04, 2006 6:16 pm
- Location: SJCA
- Contact:
-
- Member
- Posts: 62
- Joined: Sat Jul 12, 2008 4:31 am
- polianarchy
- Moderator
- Posts: 2163
- Joined: Mon Dec 04, 2006 6:16 pm
- Location: SJCA
- Contact:
- Barberry17
- Member
- Posts: 54
- Joined: Mon Aug 18, 2008 12:05 pm
- Location: New York, NY
- Contact:
I have the OnGuard Mastiff, which is the same basically, as mentioned above, and this is how the dealer showed me how to lock the Buddy with the chain. Detail of the image is showing the right side of the front wheel. Quite a secure and easy place to access!farrellcollie wrote:Is there any way you all could post pictures of how you lock the scooters up with the NY chain and the onguard lock? I am having a devil of a time figuring out where to put the chain on my buddy. thanks
<a href="http://smg.photobucket.com/albums/v32/B ... cture1.png" target="_blank"><img src="http://img.photobucket.com/albums/v32/B ... cture1.png" border="0" alt="OnGuard Mastiff Lock"></a>
[/img]
- k1dude
- Member
- Posts: 2394
- Joined: Sun Jun 08, 2008 3:11 am
- Location: Northern California
I'm not sure that's the best way to lock it. It looks as if all you have to do is unbolt the wheel and the lock will slip off the fork.Barberry17 wrote:I have the OnGuard Mastiff, which is the same basically, as mentioned above, and this is how the dealer showed me how to lock the Buddy with the chain. Detail of the image is showing the right side of the front wheel. Quite a secure and easy place to access!farrellcollie wrote:Is there any way you all could post pictures of how you lock the scooters up with the NY chain and the onguard lock? I am having a devil of a time figuring out where to put the chain on my buddy. thanks
<a href="http://smg.photobucket.com/albums/v32/B ... cture1.png" target="_blank"><img src="http://img.photobucket.com/albums/v32/B ... cture1.png" border="0" alt="OnGuard Mastiff Lock"></a>
[/img]
-
- Member
- Posts: 20
- Joined: Thu Jul 24, 2008 3:53 am
- Location: nyc