Page 1 of 1

Where is the oil fill for Blur?

Posted: Wed Jun 11, 2008 11:08 pm
by babblefish
OK, so I tried to do a search for changing oil in a Blur and came up with 1054 hits. Looked at the first 100 or so and none of them were even related to oil change. So...the question I have is where is the oil filler opening? I know where the drain plug is. I'm going to be filling it with Mobil 1 15W40 synthetic and a $23 :shock: replacement oil filter.

Posted: Wed Jun 11, 2008 11:30 pm
by justscooten
the oil filter is on the oil cooler up front behind the grill in back of the front wheel it is on the right hand side or starter butten side of the bike. i dont know what size hex head it is to take it off. hope this helps.

Posted: Thu Jun 12, 2008 12:21 am
by babblefish
Thanks, but I already know where the filter is, I just don't know where to pour the oil back into the engine. Maybe I'll just start taking the panels off, starting with the pet carrier bucket under the seat.

Posted: Thu Jun 12, 2008 12:38 am
by voodoosix
look below the muffler on the right hand side (muffler side) of the bike, should be a plastic cap there somewhere.

Posted: Thu Jun 12, 2008 12:40 am
by charlie55
It's the same opening used for the dipstick.

-Charlie

Posted: Thu Jun 12, 2008 2:30 am
by babblefish
charlie55 wrote:It's the same opening used for the dipstick.

-Charlie
You know, that makes so much sense that I feel stupid for even asking the question in the first place! :oops: :oops:

Thanks! :)