Down again...

The spirited black sheep of the Genuine lineup

Moderator: Modern Buddy Staff

Post Reply
Keys
Member
Posts: 2037
Joined: Mon Jul 24, 2006 9:57 pm
Location: Next to a big dirt lot.
Contact:

Down again...

Post by Keys »

Well, I did a rally this weekend. An 8 mile trip from 3500 ft. elev. Cottonwood to the top of Mingus Mtn. (7024 ft.), met a group of scooterists from Phoenix and Tucson and we rode back down through Cottonwood, 20 miles to Sedona and through it and up Oak Creek Canyon to Flagstaff (about 30 miles and from 3500 ft. elev. to about 7000 ft.) Had breakfast and met about 20 more scooterists. Then back down the way we came into Sedona, south to the Village of Oak Creek and up and over Beaverhead Flats Road. In Cornville, we took a right onto Page Springs road, then back through Cottonwood and Jerome to the top of Mingus Mtn. again for a night of tom-foolery, jack-assery and camping. I made it about 2 miles down Page Springs Road, though, and my engine again rattled a wee bit and quit. No compression again. I'm sure I fried a piston again.

Now, the last time this happened, it was because the oil pump had an air-leak, but when they replaced the cylinder, head, piston and wristpin, they also replaced the oil pump, so it SHOULD have been fixed! I also always put a capful or so of 2-stroke oil in the gas when I fill up as added insurance. So, I don't know WHAT happened this time....I'll keep you posted...

--Keys
"Life without music would Bb"
User avatar
Major Redneck
Member
Posts: 468
Joined: Sat Mar 14, 2009 3:38 am
Location: Concord NC

Post by Major Redneck »

Iv had to park my rattler as well,,, the clutch is trash,,, it jurks slips jurks and once it reaches the 2nd stage (30mph about) it just is unrideable... 5200 miles,,, its always jurked iv changed the rollers to sliders hoping this would help it did to some degree but with all things the more you use it the worse it gets.... the clutch pads are less than 1/8",,, aftermarket replacement is very high and needs moding in order to work (from what i was told)... Engine runs like a champ... Tires are gapped from not being balanced ,,,, at about 35mph is like riding a horse it jumps and bucks so much... At least i have other bikes to ride,,, not as fun as the rattler but gets the job done... I dont want to go with a stock clutch seeing how this one works...
Scoot'in is more fun than beating up your sister, and it comes with a key!!!
Keys
Member
Posts: 2037
Joined: Mon Jul 24, 2006 9:57 pm
Location: Next to a big dirt lot.
Contact:

Post by Keys »

I've never had any trouble with my clutch, but I've sure had my troubles with the engine! Don't know WHAT'S up!?!?!?

--Keys
"Life without music would Bb"
User avatar
laxer
Member
Posts: 1160
Joined: Thu Jun 12, 2008 3:33 am
Location: The Rocky Mountains

Post by laxer »

The only trouble I've had with mine is smashing it into the ground...
User avatar
bigbropgo
Member
Posts: 1607
Joined: Thu Jul 31, 2008 1:41 am
Location: gotham city and the 801

Post by bigbropgo »

keys might have that problem soon. :twisted:
no i don't ride a scooter, i am a scooter pilot!
Image
VICTUS MORTUUS VENATOR
Image
sean tt
Member
Posts: 4
Joined: Thu Oct 22, 2009 10:49 pm
Location: greensboro n.c

selling my rat with 492 miles the cosmetic are stolen $500

Post by sean tt »

rattler engine still onbike 492 miles $500[/u][/i][/b][/code][/list]
User avatar
bigbropgo
Member
Posts: 1607
Joined: Thu Jul 31, 2008 1:41 am
Location: gotham city and the 801

Re: selling my rat with 492 miles the cosmetic are stolen

Post by bigbropgo »

sean tt wrote:rattler engine still onbike 492 miles $500[/u][/i][/b][/code][/list]

I think your laying it on a little thick man. This forum has a for sale section, and this isn't it.[/img]
no i don't ride a scooter, i am a scooter pilot!
Image
VICTUS MORTUUS VENATOR
Image
User avatar
nissanman
Member
Posts: 1209
Joined: Thu Aug 09, 2007 4:11 pm
Location: Middletown, CT

Post by nissanman »

:clap:
EZPZ #65
Keys
Member
Posts: 2037
Joined: Mon Jul 24, 2006 9:57 pm
Location: Next to a big dirt lot.
Contact:

Post by Keys »

Here's the low-down....Genuine is once again honoring my warranty and we think we have discovered the problem and it will be rectified. AND I'm getting a Prima pipe and accompanying main jets added at the same time! I know, a lot of people have expressed disappointment in their Prima pipes, but I just GOTTA try....

--Keys
"Life without music would Bb"
User avatar
Ray Knobs
Member
Posts: 683
Joined: Wed Jun 18, 2008 3:55 pm
Location: Rochester NY
Contact:

Post by Ray Knobs »

i like my pipe

nice sound, no noticeable reduction of top end
B02S4
Member
Posts: 506
Joined: Wed Apr 22, 2009 11:33 pm

Post by B02S4 »

IF you are interested in the Rat Prima, Scooterworks now has it on sale for $170 shipped, until 11/2/09...
Keys
Member
Posts: 2037
Joined: Mon Jul 24, 2006 9:57 pm
Location: Next to a big dirt lot.
Contact:

Post by Keys »

I saw that...thanks!

--Keys
"Life without music would Bb"
User avatar
mojobuddy70cc
Banned
Posts: 177
Joined: Fri Jun 19, 2009 11:27 pm
Location: raleigh,nc

Post by mojobuddy70cc »

for a 2t the stock carb/jets are for short rides and do not deliver the gas to the carb it needs to cool the engine, , that`s right for a 2t to cool at long running time it needsmore fuel!!not more oil,,who would have thunk it. look to the 2t race bikes the all jet-out to the max. i does help keep the engine cooler.,, to much oil mix is a bad thing!
i would suggest a 21mm carb and a 95 jet. did that on a friend of mines rat, it really works better for the long trips
Post Reply