Page 1 of 1
Parts to make your Rat do in excess of 80mph.
Posted: Tue Jan 05, 2010 4:58 am
by scootertuner1000
Here's a good video of a very fast Rattler (PGO PMX)
http://www.youtube.com/watch?v=01BJfw3e ... re=related
Parts are from Moto Quest
http://www.moto-quest.com/
Engine-parts : WJ-EX 132cc-cylinder with Piston & SPL-Head KEIHIN-PWK28
Drive-parts:Malossi-multivar Malossi-ClutchBell KITACO-Clutch KN-belt KN-TorqueDriver.
Posted: Tue Jan 05, 2010 10:57 pm
by weezool
WERE DO I GET A TEMP. GADGE TO MOUNT TO MY RAT AND IS IT A PAIN IN THE ASS ,I AM TIER OF MELT DOWNS!!!!
Posted: Wed Jan 06, 2010 12:53 am
by jmkjr72
there are a bucnh out ther sp motors has some its not a big deal to mount as it sits beneath the plug against the head
cht may help prevent a melt down but you will need to know what the safe zone is first and i cant think of any one on a zuma running a cht right now
i will be running a temp guage on my zuma come spring but i will be liquid cooled by then
Posted: Wed Jan 06, 2010 1:36 am
by weezool
have you ever heard of anybody makeing a rat a LC?
Posted: Thu Jan 07, 2010 12:53 am
by jmkjr72
i havent seen it yet but i can tell you the part that you need in fact if you give sp motors a call or email i bet they can put a kit together for you
the horizontal minerrllie didnt come to the us as a l/c engine (there may have been some of the l/c mulgatis that made it to the us but i am not positive)but there are several in europe that are
you need to find a rad(dirt bike or quad or other scoot will work)
the h/m water pump or ele water pump(the h/m one will replace your fan)
and a l/c bbk
a temp guage
then have at it
you will be able to run a bit leaner and get more power and you wont notice the power drop off during a very long ride