Removing all body panels on a Rattler?

ScootLemont · Post by **ScootLemont** » Thu Apr 29, 2010 7:03 pm

I thought I saw a thread about how to remove all the body panels (changing the color of my Rattler) but I cant find it
Was I dreaming?
Anyone have a link to that?

Any help is appreciated

Ray Knobs · Post by **Ray Knobs** » Thu Apr 29, 2010 7:04 pm

It's easy, you don't need instructions to figure it out.
I did a complete swap in an hour.

Don't unscrew the headlight adjustment screw. That can stay

ScootLemont · Post by **ScootLemont** » Thu Apr 29, 2010 7:10 pm

Thanks Ray
so pretty much just take out all the screws that look like they are holding on a body panel (except the headlight screw)?

Do I need to take off the back panel on the front of the scooter (by your knees) to get the front panel off?

weezool · Post by **weezool** » Thu Apr 29, 2010 7:14 pm

ya its easy ,you just gotta do it

ScootLemont · Post by **ScootLemont** » Thu Apr 29, 2010 7:30 pm

do the headlight comes off with the front panel?

Scalpel · Post by **Scalpel** » Thu Apr 29, 2010 7:36 pm

ScootLemont wrote:do the headlight comes off with the front panel?

Yes, just make sure to unplug the cord for it before you pull the panel off too far.

ScootLemont · Post by **ScootLemont** » Mon May 10, 2010 8:21 pm

yeah... not bad at all.... took me a few minutes to figure out how the front snapped in at the bottom.... but other than that it was pretty straight forward

weezool · Post by **weezool** » Mon May 10, 2010 9:53 pm

looks like you got it done !!

Major Redneck · Post by **Major Redneck** » Mon May 10, 2010 10:17 pm

now why would one want to take off the body panels??? paint maybe???

Scalpel · Post by **Scalpel** » Mon May 10, 2010 11:00 pm

What color are you going with?