Page 1 of 1
110 Rattler bracket
Posted: Fri May 21, 2010 9:52 am
by Major Redneck
with some work and thought on how to cure a few problems with the intake on the 11o we have come up with this...
the bracket
the bracket mounted
more than enough room now to mount any intake one could want... few miner changes and well be set to mount on any 11o rattler...
Posted: Fri May 21, 2010 12:10 pm
by nissanman
Nice work... the force is strong with this one
Posted: Fri May 21, 2010 12:22 pm
by Ray Knobs
awesome, it's about time some one made one of these
nice work
can we get a side shot of the entire bike to see how far back the wheel has moved
Posted: Fri May 21, 2010 1:36 pm
by bigbropgo
Looks sick. Do you need a new brake cable? How much longer of a shock do you need to have the same ride height. Look great.
Posted: Fri May 21, 2010 2:14 pm
by weezool
CAN YOU PLEASE
MAKE ME ONE!!!!
Posted: Sat May 22, 2010 1:38 am
by vespatech
not a single one of you noticed the tire
it looks terrible on the bike altogether but i have to try riding it
just for the sake of hearing tires "churp"
give me some time just a little I am waiting on genuines slow shipping
.....befor i can assemble das motor and test this thing.
Posted: Sat May 22, 2010 1:59 am
by bigbropgo
The only thing I noticed about the tire was that its sitting on a screwdriver.
Posted: Sat May 22, 2010 2:34 am
by vespatech
it is a 145 50 10 pocket bike tire wanted power wheelies while sitting on handlebars
Posted: Sat May 22, 2010 2:38 am
by weezool
YA A LOW PROFILE ON A 12"RIM ? IHAVE BEEN THINKING ON HOW I CAN ADD
http://www.jiangwayne.com/scooter/p_i.php?i=118 THIS ON MY BIKE ,DID YOU HAVE TO CHANGE YOUR DRIVE SHAFT TO FIT THE 12" RIM? MAN I WANT THAT BRACKET!!LOL
Posted: Sat May 22, 2010 3:52 am
by B02S4
vespatech wrote:not a single one of you noticed the tire...
I noticed it right away, but did not comment. I'm surprised that you didn't go with a 12" wheel like, say, a PGO PMX.
Posted: Sat May 22, 2010 10:21 am
by Major Redneck
that tire is sick...
Posted: Sat May 22, 2010 11:39 am
by Major Redneck
bigbropgo wrote:Looks sick. Do you need a new brake cable? How much longer of a shock do you need to have the same ride height. Look great.
yes on the cables... we did not try and connect the brake cable but it well need a few inches to reach... even with the stock mount and NCY intake a new cable is needed... i do have the stock cable on mine but is just a few mm's short...
Posted: Sat May 22, 2010 3:18 pm
by vespatech
I will be going with a 12 inch wheel if i can find it, Just wanted to see what that tire looked like.
I remember when i put a 130 70 10 on the back my friend rode it and immediately after accelerating the front came up so quick he about lost it.
I warned him but he just wasnt expecting it
Posted: Sat May 22, 2010 5:10 pm
by B02S4
By going to a lower-profile rear tire, the effective final drive gearing is changed to be lower (higher numerically) all other things equal, which in part explains why the take-off is more dramatic.
If you find a decent source for a 12" rear wheel then I want pics!
Posted: Sat May 22, 2010 10:10 pm
by vespatech
in english it means hot !@$#ing rubber!
Rear shock
Posted: Sun Jun 27, 2010 8:12 pm
by SrgtBear
Major Redneck wrote:that tire is sick...
What rear shock are you using and where did you get it?
Posted: Tue Jun 29, 2010 2:23 am
by Roughhouse_Rider.
several subframes are already available. one is offered on scootercraft.com in canada and one from sip-scootershop.com in germany.
Posted: Fri Jul 02, 2010 2:31 pm
by vespatech
but then it is not homemade
Posted: Sat Jul 03, 2010 2:11 am
by nissanman
Made with love
Posted: Sat Jul 03, 2010 2:45 am
by bigbropgo
Roughhouse_Rider. wrote:several subframes are already available. one is offered on scootercraft.com in canada and one from sip-scootershop.com in germany.
I like the looks of the one from scootercraft. I wonder if there are any fit issues.
Posted: Sat Jul 03, 2010 7:17 am
by SrgtBear
bigbropgo wrote:Roughhouse_Rider. wrote:several subframes are already available. one is offered on scootercraft.com in canada and one from sip-scootershop.com in germany.
I like the looks of the one from scootercraft. I wonder if there are any fit issues.
yeah it def does look like it. The only issue is that the shocks made for the buddy are an inch shorter. Not a huge deal but just gotta re-adjust headlights. Not sure if I wanna pull the trigger.
Posted: Sat Jul 03, 2010 7:39 am
by Scalpel
bigbropgo wrote:Roughhouse_Rider. wrote:several subframes are already available. one is offered on scootercraft.com in canada and one from sip-scootershop.com in germany.
I like the looks of the one from scootercraft. I wonder if there are any fit issues.
What section is it listed under? I couldn't find it when I went looking...
Posted: Sat Jul 03, 2010 1:53 pm
by bigbropgo
Scootercraft has changed the website around a bit and its a bit harder to navigate. If you type in subframe into the search box, its the only one that comes up.
Posted: Thu Jul 15, 2010 10:23 pm
by weezool
I MADE MY OWN ,WENT TO ACE AND SPENT 20 BUCKS
Posted: Fri Jul 16, 2010 12:24 am
by bigbropgo
Pics or it didn't happen sucka
Posted: Fri Jul 16, 2010 4:58 pm
by weezool
HERE IT IS
Posted: Fri Jul 16, 2010 5:18 pm
by bigbropgo
Your bigbro approves.
Feel strong and stable? New cables? If you get a chance, I'd love to see a pic of the stance a little further back. Good work man.
Hows your set up working out. You put in a lot of work in a short amount of time. Just wondering if she's still runnin strong.
Posted: Fri Jul 16, 2010 6:22 pm
by weezool
VERRY STRONG ,I LOVE IT IT LOOKS RIGHT NOW ,IT LOOKED TOO STUBBIE BEFORE ,IT RIDES SMOOTHER ,NO CABLES AT ALL JUST GOTTA HAVE THE SHOCK ADJUSTER
PS YA A LOTTA WORK IN A SHORT TIME SHE FLYES ,I WANT TO GO TO A 24MM CARB FROM MOPED HOSP ,SOON