Page 1 of 1
How to fix a broken mirror on Buddy 125
Posted: Tue Mar 05, 2013 5:52 am
by NOpderbeck
I have a Buddy 125 and the mirror snapped off when tightening it. It left the post of the mirror lodged in the handlebar.
I assume I have to disassemble the handles to get at the post.
Any ideas on how to do that?
Posted: Tue Mar 12, 2013 4:37 pm
by SuperCyclone.81
I dont know that disassembly is going to be the solution here. Your probably going to have to tap it out... Unless you can get some pliers on it somehow.
Posted: Wed Mar 13, 2013 1:11 am
by NOpderbeck
Can you help clarify what you mean by "tap it out." Do you mean hammer it downward?
Posted: Wed Mar 13, 2013 2:58 pm
by SuperCyclone.81
No no, your actually going to need a tap and die.
set.
http://www.amazon.com/Neiko-40-Piece-Ti ... 498&sr=1-2
I've never done it myself, I always get a shop to do it. But apparently you really only have one shot at drilling your hole out and if you mess it up, your pretty much screwed. So if you do decide to DIY, be careful!