What gasket for Roughhouse exhaust?
Moderator: Modern Buddy Staff
- OBX Dan
- Member
- Posts: 66
- Joined: Sat May 11, 2019 4:17 pm
- Location: Outer Banks, N.C.
What gasket for Roughhouse exhaust?
And where can I get a stock exhaust for the little beast?
-
- Member
- Posts: 46
- Joined: Wed Feb 02, 2011 4:54 pm
http://www.scooterloungeonline.com/prod ... FFLER%20BCOBX Dan wrote:Nobody? The guy at scooterworks told me to get a gy6 gasket. Are the gaskets the same with that engine and my little minerelli 50cc?
- OBX Dan
- Member
- Posts: 66
- Joined: Sat May 11, 2019 4:17 pm
- Location: Outer Banks, N.C.
Feral_Sparky wrote:http://www.scooterloungeonline.com/prod ... FFLER%20BCOBX Dan wrote:Nobody? The guy at scooterworks told me to get a gy6 gasket. Are the gaskets the same with that engine and my little minerelli 50cc?
Thank you so much. I have ordered from them several times and they are great. Any idea where a stock exhaust could be found?
- Stanza
- Member
- Posts: 575
- Joined: Mon Jan 29, 2018 8:34 pm
- Location: Chicago
-
- Member
- Posts: 46
- Joined: Wed Feb 02, 2011 4:54 pm
Stock exhausts are around $400-450 and available on that site.OBX Dan wrote:Feral_Sparky wrote:http://www.scooterloungeonline.com/prod ... FFLER%20BCOBX Dan wrote:Nobody? The guy at scooterworks told me to get a gy6 gasket. Are the gaskets the same with that engine and my little minerelli 50cc?
Thank you so much. I have ordered from them several times and they are great. Any idea where a stock exhaust could be found?
- OBX Dan
- Member
- Posts: 66
- Joined: Sat May 11, 2019 4:17 pm
- Location: Outer Banks, N.C.
Well screw a stock exhaust then. I'm gonna get this one by prima. I haven't heard great things about their welds.
https://www.scooterworks.com/Prima-Perf ... P8747.aspx
Can anyone suggest a size to re-jet? 90?
https://www.scooterworks.com/Prima-Perf ... P8747.aspx
Can anyone suggest a size to re-jet? 90?
-
- Member
- Posts: 46
- Joined: Wed Feb 02, 2011 4:54 pm
If you want stock but better get the sport exhaust.OBX Dan wrote:Well screw a stock exhaust then. I'm gonna get this one by prima. I haven't heard great things about their welds.
https://www.scooterworks.com/Prima-Perf ... P8747.aspx
Can anyone suggest a size to re-jet? 90?
https://www.amazon.com/Performance-Exha ... B015ONNLOE
- OBX Dan
- Member
- Posts: 66
- Joined: Sat May 11, 2019 4:17 pm
- Location: Outer Banks, N.C.
I actually got this one. Any idea what to jet it? 90?Feral_Sparky wrote:If you want stock but better get the sport exhaust.OBX Dan wrote:Well screw a stock exhaust then. I'm gonna get this one by prima. I haven't heard great things about their welds.
https://www.scooterworks.com/Prima-Perf ... P8747.aspx
Can anyone suggest a size to re-jet? 90?
https://www.amazon.com/Performance-Exha ... B015ONNLOE
https://www.scooterworks.com/Prima-Perf ... P8747.aspx