blur 250 (aka G MAX) oil filter

faizf · Post by **faizf** » Sat Jun 13, 2009 4:23 pm

hey evrey one im new here , i have a blur 250 and i can't find the oil filter i did a search but all the answers was about the blur 150 ,
i checked my blur , the filter is not on the oil cooler
i will be happy for any help.

thanks

fs8gbe · Post by **fs8gbe** » Sun Jun 14, 2009 12:51 am

not sure, we only have the 150 here in the states...

Erlkonig · Post by **Erlkonig** » Mon Jun 15, 2009 1:55 am

blur 250 use Kymco Grand Dink 250 (in us call Grand vista 250 )water cool engine . I use to have one but I did not remeber any "oil" filter that needed to be replace

there is a metal screen type oil strainer in the bottom of the engine with

big hex head , it can be clean but you need to replace the o- ring when

you remove it . therefore, as a memember of Sounthern Grand Dink

scooter club, I did knew anyone clean or replace it, it mostly done when

engine overhaul.

faizf · Post by **faizf** » Mon Jun 15, 2009 5:15 pm

ok i get it , i will change the oil and thats it for now .
thank you all for the help

Irishrover · Post by **Irishrover** » Sat Jul 11, 2009 9:13 am

faizf, I would be surprised if there is no oil filter on a 250cc. You would find it on the right hand side down at the front wheel behind the air intake grill, it will be sitting on top of the oil cooler and not hanging down. It is also a small black dumpy canister with a hex on top.