Driver Foot Pegs

Discussion of Genuine Scooters and Anything Scooter Related

Moderator: Modern Buddy Staff

Post Reply
healingpath
Member
Posts: 84
Joined: Wed Mar 28, 2007 1:29 am
Location: Cerrillos/Santa Fe, NM

Driver Foot Pegs

Post by healingpath »

Has anyone experimented with adding/attaching driver foot pegs to their scooter?
I'd like to do this, but don't know how to proceed. Having ones that could fold up and out of the way would be best.
Thanks,
Matthew
User avatar
ScooterDave
Most Likely to Spontaneously Combust
Posts: 867
Joined: Tue Oct 31, 2006 6:43 am
Location: 127.0.0.1
Contact:

Post by ScooterDave »

Why would you want foot pegs?
healingpath
Member
Posts: 84
Joined: Wed Mar 28, 2007 1:29 am
Location: Cerrillos/Santa Fe, NM

Post by healingpath »

Well Dave, at the risk of stating the obvious, I'd want them so I could stretch out my legs a bit on the long rides I normally take. I can see where they might not be desireable if your main riding is around town, but mine isn't. It's on the open road, and I like longer rides (as in hundreds of miles at a time, aside from my normal 60 mile RT commute) and foot pegs, well, I think you get the idea.
truckasaurus
Member
Posts: 19
Joined: Fri Sep 28, 2007 9:13 pm
Location: Houston

Post by truckasaurus »

healingpath wrote:Well Dave, at the risk of stating the obvious, I'd want them so I could stretch out my legs a bit on the long rides I normally take. I can see where they might not be desireable if your main riding is around town, but mine isn't. It's on the open road, and I like longer rides (as in hundreds of miles at a time, aside from my normal 60 mile RT commute) and foot pegs, well, I think you get the idea.
I'd vote for some "highway" pegs just for scooting around town... i'd be much more comfortable, but then again, i'm 6'4"
User avatar
Drumwoulf
Member
Posts: 810
Joined: Mon Jan 01, 2007 6:49 pm

Post by Drumwoulf »

truckasaurus wrote: I'd vote for some "highway" pegs just for scooting around town... i'd be much more comfortable, but then again, i'm 6'4"
Hear hear! +1.
If we ever got round legshield guards for the Buddy like the Vespa ET4 accessory, MC footpegs could be clamped onto them on the front low outside corners for more legroom! Everytime I see a scoot with those chrome legshield guards I think about hiway footpegs.......
Namaste,
~drummer~

07 Buddy 125
07 Vespa GT200
User avatar
robtaylor
Member
Posts: 538
Joined: Fri Oct 12, 2007 2:12 am
Location: tulsa,ok
Contact:

Post by robtaylor »

i was wondering about using the passenger footpegs and just flipping them around to fit on the front of the floorboard insted of the rear?
User avatar
robtaylor
Member
Posts: 538
Joined: Fri Oct 12, 2007 2:12 am
Location: tulsa,ok
Contact:

Post by robtaylor »

just wondering if anyone has attached "highway pegs" or the like to the buddy yet?
formerly known as robonz23

www.cannonballbuddy.com
User avatar
Penguinboy
Member
Posts: 117
Joined: Tue May 13, 2008 3:54 pm
Location: Boston, MA

Post by Penguinboy »

Me and my size 12 feet have been wondering this as well.....
User avatar
schlagle
Member
Posts: 202
Joined: Mon Mar 17, 2008 9:44 pm
Location: Newark, CA
Contact:

Post by schlagle »

User avatar
Alix B
Member
Posts: 638
Joined: Tue Jul 10, 2007 1:13 pm
Location: Richmond, VA

Post by Alix B »

I have foot pegs on my Buddy. It's a Genuine accessory.
At first they sucked hard. Within a week I was used to them and the bruises went away. :D
I love them for the long driving I'm doing. I might take them off once the long haul is over.
User avatar
issue31
Member
Posts: 101
Joined: Sun Apr 03, 2011 5:36 pm
Location: Plainview MN.

Foot pegs

Post by issue31 »

somewhere there is a write up with photos of a set I made for my buddy 170.they are in me someplace . Try google for scooter foot pegs and see what happens. It took me a while to make them as I made them out of stainless steel, and it took several try's. I an 6.2 and they sure are nice to have! Issue31
bigmike7801
Member
Posts: 97
Joined: Tue Jan 27, 2015 4:02 pm
Location: Vancouver WA

Re: Foot pegs

Post by bigmike7801 »

issue31 wrote:somewhere there is a write up with photos of a set I made for my buddy 170.they are in me someplace . Try google for scooter foot pegs and see what happens. It took me a while to make them as I made them out of stainless steel, and it took several try's. I an 6.2 and they sure are nice to have! Issue31
Found it!

http://itistheride.boards.net/thread/55 ... -foot-pegs
Post Reply