where do I get a stair ramp?

Discussion of Genuine Scooters and Anything Scooter Related

Moderator: Modern Buddy Staff

Post Reply
User avatar
jencallwa
Member
Posts: 6
Joined: Sat Jul 28, 2007 11:05 am
Location: Seattle, WA - Queen Anne

where do I get a stair ramp?

Post by jencallwa »

Hi, I just got a 125cc buddy (orange!) and I need a ramp to get it up the 3 steps at the entrance of my building (too heavy for me).

I have no idea where to buy one in Seattle. Any ideas? I need it ASAP so I prefer to buy it directly at a store to avoid waiting for delivery.

Help!
User avatar
Scootin_in_La
Member
Posts: 21
Joined: Tue Jun 26, 2007 1:29 pm
Location: New Orleans

Post by Scootin_in_La »

Try some medical supply stores - wheelchair ramps.

Jody
"Follow your heart, unless it leads you someplace stupid." -- Jiffy Lube on Veterans Blvd., New Orleans, LA
User avatar
krylonics
Member
Posts: 45
Joined: Sun Apr 15, 2007 5:24 pm
Location: Grand Rapids MI
Contact:

Post by krylonics »

Try an auto supply for a ramp. They sell ones that attach to pickup trucks that are especially nice since they fold in half for storage. Call a Pep Boys if you have them in your area. Or a few 2 by 4s and some plywood.
Dave R
Dealer
Posts: 64
Joined: Thu Jun 15, 2006 6:52 pm
Location: Seattle
Contact:

Post by Dave R »

We carry bike loading ramps that would work perfect ! Give us a call we carry both a folding and a non folding... $109-$149..

http://www.oxlite.com/Motorcycles2.htm
Ducati Seattle/Genuine Scooters Seattle is now on Facebook at
http://www.facebook.com/pages/Genuine-S ... 555?ref=ts
Please become a fan
User avatar
Tbone
Member
Posts: 389
Joined: Mon Apr 30, 2007 4:09 pm
Location: West Sacramento
Contact:

Post by Tbone »

Dude, I must be ghetto or something. I'm thinking local hardware supply store, maybe $20 for some ply wood...
"Life Is all about ASS! You're either covering it, laughing it off, kicking it, kissing it, busting it, or trying to get a piece of it!"
User avatar
ellen
Member
Posts: 330
Joined: Sat Jun 10, 2006 1:15 am
Location: Southwestern CT
Contact:

Post by ellen »

Got to Home Depot, get a 1" X 12", they will cut it to size for you.
Probably cost around $8
User avatar
ryder1
Member
Posts: 752
Joined: Sun Jul 15, 2007 11:54 pm
Location: MN

Post by ryder1 »

Do you need the ramp to be portable to take with you?

Realize you want to buy locally but this might be an idea
http://www.portable-wheelchair-ramps.co ... _ramp.aspx

The dealer for my scoot has a ramp for scooters that folds in 1/2 the long way (about 12" wide) except it is long enough to use to load scooter on back of pickup truck. Maybe they make something like this but not as long.

http://www.buyautotruckaccessories.com/ ... YQodP0HOfg

This might give you some ideas to take with to your local stores and ask if they have anything similar available.

Did you check with the dealer you bought your Buddy from?
User avatar
ScooterDave
Most Likely to Spontaneously Combust
Posts: 867
Joined: Tue Oct 31, 2006 6:43 am
Location: 127.0.0.1
Contact:

Post by ScooterDave »

Folding ramps stink. Hate 'em.

When I take a scooter to my downtown apartment, I bring it inside up 3 steps. I found a 4 foot x 8" plank. Works like a champ and cost me nothing.

Dave
User avatar
cowgirl helmet
Member
Posts: 193
Joined: Tue Jun 12, 2007 4:47 am
Location: Washington, DC, metro area

Post by cowgirl helmet »

You might want to check your local Craigslist for a ramp that might work. I'm considering a few ramps that are posted on the DC area list. One of them is a wheelchair ramp that packs conveniently into a suitcase. Pretty amazing.
User avatar
corey
Member
Posts: 70
Joined: Mon Jul 23, 2007 9:07 pm
Location: cambridge ma

Post by corey »

Tbone wrote:Dude, I must be ghetto or something. I'm thinking local hardware supply store, maybe $20 for some ply wood...
that's what i went with! except it only cost me about $4 in wood...
User avatar
un_designer
Member
Posts: 483
Joined: Sun Jun 17, 2007 1:28 pm
Location: Denver, CO

Post by un_designer »

to those of you who are using a piece of wood as the ramp... what's holding the piece of wood in place so that it wouldn't just slip and fall down?
ThisDude
Member
Posts: 234
Joined: Mon Jul 02, 2007 3:29 am
Location: Norwalk, CA not CT

Post by ThisDude »

I would think the weight of the buddy would hold it down nicely, or use some contact adhesive and glue a sheet of rubber on one side so it won't slip on the concrete.
Post Reply