Can't stop the mods

Discussion of Genuine Scooters and Anything Scooter Related

Moderator: Modern Buddy Staff

Post Reply
User avatar
Dan Buddy
Member
Posts: 138
Joined: Wed Jun 06, 2007 3:09 pm
Location: De Pere, WI

Can't stop the mods

Post by Dan Buddy »

Well it's been a couple of weeks so I guess it was time to do a little more modification to the Buddy. This weeks changes were adding a chrome rear rack and a tall windshield cut down to 15 3/4 inches. I also made small half oval cutouts for the upper blinkers just for fun. I did find that once I had the top edge smoothed out the factory edge looked a pretty rough so I smoothed out the rest of the factory edges.

When cutting down the windshield I would strongly recommend taping / protecting the entire windshield to prevent scratches and putting a little painters tape on the jigsaw guide is also helpful. For smoothing out the factory edge I made three passes - 1st time with 120 grit, 2nd time with 240 grit and the 3rd time I wet sanded with 600 grit. The edge looks great, so great my wife had me clean up the factory edge on her windshield.
Attachments
Side view
Side view
DSC_2612-1.jpg (152.61 KiB) Viewed 1704 times
Windshield
Windshield
DSC_2614-1.jpg (94.72 KiB) Viewed 1704 times
Windshield edge
Windshield edge
DSC_2613-1.jpg (114.29 KiB) Viewed 1704 times
Blinker closeup
Blinker closeup
DSC_2615-1.JPG (68.69 KiB) Viewed 1704 times
User avatar
ScooterTrash
Member
Posts: 2007
Joined: Sun Jun 03, 2007 5:00 pm
Location: Idaho Falls, ID

Post by ScooterTrash »

I like the black and red
User avatar
weaseltamer
Member
Posts: 424
Joined: Wed Apr 04, 2007 5:20 am

Post by weaseltamer »

where do you get that sharp looking chrome edge you have on the bumper?
User avatar
Dan Buddy
Member
Posts: 138
Joined: Wed Jun 06, 2007 3:09 pm
Location: De Pere, WI

Post by Dan Buddy »

I got the chrome edge from Auto Zone but just about any car parts store will have it. It's just car door edge trim. It was under $6 for a roll. A cheap mod with a cool look.
User avatar
pugbuddy
Member
Posts: 1659
Joined: Thu Jun 14, 2007 2:31 am
Location: Tulsa OK

Post by pugbuddy »

where do you get that sharp looking chrome edge you have on the bumper?
The Buddy has a bumper? Am I missing something or just blind? :?:
User avatar
weaseltamer
Member
Posts: 424
Joined: Wed Apr 04, 2007 5:20 am

Post by weaseltamer »

i was calling the front wheel cover a bumper. just cuz its in front i suppose
User avatar
twharton
Member
Posts: 228
Joined: Fri Jul 28, 2006 8:16 am
Location: Northwest, FL

Post by twharton »

That two tone scheme is waayy cool! Did you paint it or buy the different colored panels?

Why didn't you just purchase the medium screen?
twharton
Northwest, FL
"Where thousands live the way millions wish they could!"
User avatar
polianarchy
Moderator
Posts: 2163
Joined: Mon Dec 04, 2006 6:16 pm
Location: SJCA
Contact:

Post by polianarchy »

weaseltamer wrote:i was calling the front wheel cover a bumper. just cuz its in front i suppose
I call mine the fender. I think that's right. :?:
ModBud #442
User avatar
Dan Buddy
Member
Posts: 138
Joined: Wed Jun 06, 2007 3:09 pm
Location: De Pere, WI

Post by Dan Buddy »

I painted the body panels myself with Krylon Fusion spray paint. I figured if I didn't like the results I would just pick replacement panels but it turn out ok. Don't try to do it in one coat of paint, I think I did 6 or 7 light coats and once a had the coverage I wanted I wet sanded before applying one last coat of paint.

I still want to paint my rims and add some tunes to my Buddy. I am waiting on a raining weekend to paint the rims and I am not sure what to do about the tunes. I am really leaning towards just using a stereo blue tooth headset. From what I have read it's not against the law here unless it interferes with safe operation of the vehicle. Obviously I am not talking about cranking it up, just a little background music while riding to work. I am curious if the engine will interfere with the Bluetooth reception.
User avatar
twharton
Member
Posts: 228
Joined: Fri Jul 28, 2006 8:16 am
Location: Northwest, FL

Post by twharton »

I bought some chrome edge from AutoZone at lunch. Can't wait to get home tonight and further 'Pimp My Ride'.

The chrome cowl protectors and footpegs + tan SX bag a supposed to arrive from Motorsport Scooters (scooterwest.com) tomorrow!

I'm pretty sure I'm going to get the short, old style, wind screen.

Then I think white wall paint for the tires.

Thanks for the chrome edge trip. That is just most excellent!!!
twharton
Northwest, FL
"Where thousands live the way millions wish they could!"
User avatar
vickireynard
Member
Posts: 3
Joined: Sat Jun 02, 2007 3:55 am
Location: De Pere, WI

too cool

Post by vickireynard »

WOW you have one sweet ride. I bet you look cool on it too. :D :D
User avatar
cowgirl helmet
Member
Posts: 193
Joined: Tue Jun 12, 2007 4:47 am
Location: Washington, DC, metro area

Post by cowgirl helmet »

Dan, which windscreen did you cut down and put on your Bud?
User avatar
Dan Buddy
Member
Posts: 138
Joined: Wed Jun 06, 2007 3:09 pm
Location: De Pere, WI

Post by Dan Buddy »

I purchased the "tall" windshield. I really liked the Genuine windshield but for the 2006 Buddy there was either a short or tall windshield. I have heard that there is a medium windshield available from Genuine for 2007 Buddys.
Post Reply