Can't stop the mods
Moderator: Modern Buddy Staff
- Dan Buddy
- Member
- Posts: 138
- Joined: Wed Jun 06, 2007 3:09 pm
- Location: De Pere, WI
Can't stop the mods
Well it's been a couple of weeks so I guess it was time to do a little more modification to the Buddy. This weeks changes were adding a chrome rear rack and a tall windshield cut down to 15 3/4 inches. I also made small half oval cutouts for the upper blinkers just for fun. I did find that once I had the top edge smoothed out the factory edge looked a pretty rough so I smoothed out the rest of the factory edges.
When cutting down the windshield I would strongly recommend taping / protecting the entire windshield to prevent scratches and putting a little painters tape on the jigsaw guide is also helpful. For smoothing out the factory edge I made three passes - 1st time with 120 grit, 2nd time with 240 grit and the 3rd time I wet sanded with 600 grit. The edge looks great, so great my wife had me clean up the factory edge on her windshield.
When cutting down the windshield I would strongly recommend taping / protecting the entire windshield to prevent scratches and putting a little painters tape on the jigsaw guide is also helpful. For smoothing out the factory edge I made three passes - 1st time with 120 grit, 2nd time with 240 grit and the 3rd time I wet sanded with 600 grit. The edge looks great, so great my wife had me clean up the factory edge on her windshield.
- Attachments
-
- Side view
- DSC_2612-1.jpg (152.61 KiB) Viewed 1708 times
-
- Windshield
- DSC_2614-1.jpg (94.72 KiB) Viewed 1708 times
-
- Windshield edge
- DSC_2613-1.jpg (114.29 KiB) Viewed 1708 times
-
- Blinker closeup
- DSC_2615-1.JPG (68.69 KiB) Viewed 1708 times
- ScooterTrash
- Member
- Posts: 2007
- Joined: Sun Jun 03, 2007 5:00 pm
- Location: Idaho Falls, ID
- weaseltamer
- Member
- Posts: 424
- Joined: Wed Apr 04, 2007 5:20 am
- weaseltamer
- Member
- Posts: 424
- Joined: Wed Apr 04, 2007 5:20 am
- twharton
- Member
- Posts: 228
- Joined: Fri Jul 28, 2006 8:16 am
- Location: Northwest, FL
- polianarchy
- Moderator
- Posts: 2163
- Joined: Mon Dec 04, 2006 6:16 pm
- Location: SJCA
- Contact:
- Dan Buddy
- Member
- Posts: 138
- Joined: Wed Jun 06, 2007 3:09 pm
- Location: De Pere, WI
I painted the body panels myself with Krylon Fusion spray paint. I figured if I didn't like the results I would just pick replacement panels but it turn out ok. Don't try to do it in one coat of paint, I think I did 6 or 7 light coats and once a had the coverage I wanted I wet sanded before applying one last coat of paint.
I still want to paint my rims and add some tunes to my Buddy. I am waiting on a raining weekend to paint the rims and I am not sure what to do about the tunes. I am really leaning towards just using a stereo blue tooth headset. From what I have read it's not against the law here unless it interferes with safe operation of the vehicle. Obviously I am not talking about cranking it up, just a little background music while riding to work. I am curious if the engine will interfere with the Bluetooth reception.
I still want to paint my rims and add some tunes to my Buddy. I am waiting on a raining weekend to paint the rims and I am not sure what to do about the tunes. I am really leaning towards just using a stereo blue tooth headset. From what I have read it's not against the law here unless it interferes with safe operation of the vehicle. Obviously I am not talking about cranking it up, just a little background music while riding to work. I am curious if the engine will interfere with the Bluetooth reception.
- twharton
- Member
- Posts: 228
- Joined: Fri Jul 28, 2006 8:16 am
- Location: Northwest, FL
I bought some chrome edge from AutoZone at lunch. Can't wait to get home tonight and further 'Pimp My Ride'.
The chrome cowl protectors and footpegs + tan SX bag a supposed to arrive from Motorsport Scooters (scooterwest.com) tomorrow!
I'm pretty sure I'm going to get the short, old style, wind screen.
Then I think white wall paint for the tires.
Thanks for the chrome edge trip. That is just most excellent!!!
The chrome cowl protectors and footpegs + tan SX bag a supposed to arrive from Motorsport Scooters (scooterwest.com) tomorrow!
I'm pretty sure I'm going to get the short, old style, wind screen.
Then I think white wall paint for the tires.
Thanks for the chrome edge trip. That is just most excellent!!!
twharton
Northwest, FL
"Where thousands live the way millions wish they could!"
Northwest, FL
"Where thousands live the way millions wish they could!"
- vickireynard
- Member
- Posts: 3
- Joined: Sat Jun 02, 2007 3:55 am
- Location: De Pere, WI
too cool
WOW you have one sweet ride. I bet you look cool on it too.



- cowgirl helmet
- Member
- Posts: 193
- Joined: Tue Jun 12, 2007 4:47 am
- Location: Washington, DC, metro area
- Dan Buddy
- Member
- Posts: 138
- Joined: Wed Jun 06, 2007 3:09 pm
- Location: De Pere, WI