GY6 Resource site

Fueldrum · Post by **Fueldrum** » Tue Oct 13, 2009 12:54 pm

If you haven't seen this before:

http://www.monstergy6.com/index.htm

Just stumbled across it thanks to the miracle that is Google Ads.

Kaos · Post by **Kaos** » Tue Oct 13, 2009 1:29 pm

Be careful with sites like that. Our motors arn't 100% GY6 compatible, especially the 125's. And many of those sites sell VERY cheap China parts.

Not that this might not be a good resource for parts, but be careful!

EDIT: And they have some odd practices, the variator fans are sold separately from the variators.... And their parts list is tiny, they also make claims that the parts the sell fit 100% of GY6's, which is not true...

Fueldrum · Post by **Fueldrum** » Tue Oct 13, 2009 1:32 pm

Groovy Kaos, figured it was something along those lines. Pretty clear their air filters wouldn't fit the Buddy. Thanks for the heads up!

Kaos · Post by **Kaos** » Tue Oct 13, 2009 1:35 pm

Fueldrum wrote:Groovy Kaos, figured it was something along those lines. Pretty clear their air filters wouldn't fit the Buddy. Thanks for the heads up!

Not a problem

I just like to be sure that people understand where the Buddy fits in the GY6 family before they get too excited by the huge amount of so-called "GY6 Compatible" parts sites out there

Fueldrum · Post by **Fueldrum** » Tue Oct 13, 2009 2:37 pm

Kaos wrote:Not a problem I just like to be sure that people understand where the Buddy fits in the GY6 family before they get too excited by the huge amount of so-called "GY6 Compatible" parts sites out there

You mean at the very top as the ruler of the GY6 monarchy, right?

Kaos · Post by **Kaos** » Tue Oct 13, 2009 3:41 pm

Fueldrum wrote:
Kaos wrote:Not a problem I just like to be sure that people understand where the Buddy fits in the GY6 family before they get too excited by the huge amount of so-called "GY6 Compatible" parts sites out there
You mean at the very top as the ruler of the GY6 monarchy, right?

Heh, something like that

Lil Buddy · Post by **Lil Buddy** » Tue Oct 13, 2009 4:21 pm

Theres a lot of

and

going on. Buddy owners sure are happy people

Wheelz · Post by **Wheelz** » Tue Oct 13, 2009 4:40 pm

well allow the rattler rider to chime in then:

You guys are just too nice

c'mon Kaos tell him that site is a straight rip off

possibly a scoot chop shop

variator fans with out variators

all gy6's are not the same any site that says they are is suspect

bpnwmike · Post by **bpnwmike** » Tue Oct 13, 2009 10:48 pm

Hey guys, don't be TOO harsh - I sell variator fans separate from the variators too. People break the fins off their fans all the time when trying to service or change their variators without an impact wrench.

You'd be surprised how many people need new fan plates!

Other than that, his prices *are* suspiciously on the low side...

KRUSTYburger · Post by **KRUSTYburger** » Wed Oct 14, 2009 12:19 am

I broke a blade off my variator fan.

Well, for the record, I was not the one turning the nut, I was the one holding the fan saying "I'm sure that's tight enou..." (followed by snapping sound).

Also if I ever hit it big at the casino, I'm gonna be making a monumental order, bpnwmike.

Kaos · Post by **Kaos** » Wed Oct 14, 2009 1:12 am

bpnwmike wrote:Hey guys, don't be TOO harsh - I sell variator fans separate from the variators too. People break the fins off their fans all the time when trying to service or change their variators without an impact wrench.

You'd be surprised how many people need new fan plates!

Other than that, his prices *are* suspiciously on the low side...

See, thats good info Mike.

I know that you DO inform people that not all GY6's are the same though, and like you said, his prices raise flags. He MAY be on the up-and-up, but I prefer to support our community parts suppliers (like yourself) that we deal with all the time.

bpnwmike · Post by **bpnwmike** » Wed Oct 14, 2009 7:36 pm

KRUSTYburger wrote:Also if I ever hit it big at the casino, I'm gonna be making a monumental order, bpnwmike.

My fingers are crossed for ya!