buddy clutch assembly

sambrgr · Post by **sambrgr** » Wed May 05, 2010 3:30 pm

Is there a drawing available or can someone tell me which side of the contra spring does the spring guide go on?

Lagerhead · Post by **Lagerhead** » Wed May 05, 2010 3:55 pm

Does this help?

http://www.scooterloungeonline.com/file ... %20125.jpg

I don't think the spring itself has a specific top or bottom.

Howardr · Post by **Howardr** » Wed May 05, 2010 4:04 pm

So, when you take the nut off of the clutch bell, does the whole thing come apart?

Howard

cheez37 · Post by **cheez37** » Wed May 05, 2010 4:19 pm

Howardr wrote:So, when you take the nut off of the clutch bell, does the whole thing come apart?

No, you can remove the clutch bell off. It all comes apart when you remove the 2nd nut (part #2 on the drawing on the scooterlounge drawing).

DANGER ALERT!
Be careful when removing this nut. The spring is strong, and if the clutch is pointing at you when you remove this nut, it will fly off and could cause injury!

I used a couple of clamps to fix the entire assembly to my workbench before removing the nut and to get it back on after replacing the spring and clutch.

sambrgr · Post by **sambrgr** » Wed May 05, 2010 4:21 pm

Thanks Lagerhead! Thats exactly what I needed.

Lagerhead · Post by **Lagerhead** » Wed May 05, 2010 4:29 pm

sambrgr wrote:Thanks Lagerhead! Thats exactly what I needed.

No problemo! (There's my Cinco De Mayo contribution for the day

)

You're in Seven Hills Ohio? Like near Mount Healthy? (Where I'm from.)