Cylinder bought it - most likely oil injector quit

The spirited black sheep of the Genuine lineup

Moderator: Modern Buddy Staff

Post Reply
User avatar
ScootLemont
Member
Posts: 2526
Joined: Fri Apr 11, 2008 6:20 pm
Location: Lemont IL
Contact:

Cylinder bought it - most likely oil injector quit

Post by ScootLemont »

Based on the extra metal bonded to my spark plug, I am guessing my cylinder has bought the farm.

I am assuming that the 400+ miles of trailering & resulting flooding problems somehow messed up the oil injector and it stopped injecting oil

Plan right now? - new cylinder & anything else needed to get it going again & take the oil injector out of the loop & just pre-mix.

This really sucks - I have had more trouble with my Rattler in the last two weeks than I have had in two years

Image
User avatar
bigbropgo
Member
Posts: 1607
Joined: Thu Jul 31, 2008 1:41 am
Location: gotham city and the 801

Post by bigbropgo »

That really sucks. I always wondered if you could pull the oil hose from the intake and use the electric start to see if oil comes out. Sounds like a simple test, just not sure if its really that easy. On a side note, jiangwayne.com still has the bws big bore on sale.

I have stopped wondering if this will happen to me. Just when will it happen. :(
no i don't ride a scooter, i am a scooter pilot!
Image
VICTUS MORTUUS VENATOR
Image
User avatar
dynarex
Member
Posts: 91
Joined: Mon May 03, 2010 1:28 am
Location: cape coral,florida

Post by dynarex »

its really really rare that the oil pump fails-its the same design for 45 years-tried and true-plug looks a little lean
btw if you want my rat110 cylinder and piston let me know
User avatar
ScootLemont
Member
Posts: 2526
Joined: Fri Apr 11, 2008 6:20 pm
Location: Lemont IL
Contact:

Post by ScootLemont »

my new cycle guy says... probably didnt fail... but could have gotten clogged up with something - wont know until he tears it apart
He has even seen a small scrap of the foil from the cap seal on the 2T oil bottles clog up injectors -
He says after that much trailer time, there is no telling what bounced loose & ended up clogging up the oil injector
User avatar
ScootLemont
Member
Posts: 2526
Joined: Fri Apr 11, 2008 6:20 pm
Location: Lemont IL
Contact:

Post by ScootLemont »

dynarex wrote:plug looks a little lean
btw if you want my rat110 cylinder and piston let me know
that plug only had about 10 miles on it
User avatar
dynarex
Member
Posts: 91
Joined: Mon May 03, 2010 1:28 am
Location: cape coral,florida

Post by dynarex »

ususlly if lack of oil-you will see entire skirt of piston scored-
overheating is a 4 corner seizure
detonation is top of piston and spark plug metal transfer
still looks lean to me-maybe air leak at base gasket or exhaust flange?
User avatar
ScootLemont
Member
Posts: 2526
Joined: Fri Apr 11, 2008 6:20 pm
Location: Lemont IL
Contact:

Post by ScootLemont »

I have no idea.... I guess we will find out when we pull it apart
Post Reply