It is official I am going big bore!

Mr Miller · Post by **Mr Miller** » Sun Sep 27, 2009 5:12 pm

Well I dropped off my black jack yesterday at the BikeBarn in Medford to have my big bore installed. Won't get it back till next Saturday, I already miss him:(.
So I am going with the 171.3 bigbore kit from NCY with their 61mm big valve head, with probably a 105 jet (they'll figure that part out to me)

I will keep you updated

jfrost2 · Post by **jfrost2** » Sun Sep 27, 2009 6:58 pm

Does NCY make a 171cc kit? I thought there was only 163cc.

Kaos · Post by **Kaos** » Sun Sep 27, 2009 8:10 pm

jfrost2 wrote:Does NCY make a 171cc kit? I thought there was only 163cc.

Its 161cc, and yeah they make both a 171cc for the 150's and a 177cc jug thats for the 60mm stroker crank to come up to 183cc.

EDIT: Ohh, and congrats Mr Miller, leme know if you want to do a write up for Voodoo Buddy

vaderscoot · Post by **vaderscoot** » Sun Sep 27, 2009 8:36 pm

make sure you dont do any wheeles when you get it back

Mr Miller · Post by **Mr Miller** » Mon Sep 28, 2009 2:56 pm

Yeah no more wheelies just not worth it

They are going to look at and fix the little bit of damage that it has.

Kaos, once I get it broke in again I should bring it up to Ptown and let you test it for voodoo buddy

rajron · Post by **rajron** » Mon Sep 28, 2009 3:17 pm

Sounds like fun!
With all that capacity – wheelies will just happen.

Kaos · Post by **Kaos** » Mon Sep 28, 2009 3:28 pm

Mr Miller wrote:Yeah no more wheelies just not worth it They are going to look at and fix the little bit of damage that it has.

Kaos, once I get it broke in again I should bring it up to Ptown and let you test it for voodoo buddy

That would be awesome

I'm curious how it performs vs the 161, because the 161 still has a longer stroke than the 171. We could go down to Portland International Raceway on drag night and do a head-to-head

Mr Miller · Post by **Mr Miller** » Mon Sep 28, 2009 6:02 pm

that would be awsome!

Mr Miller · Post by **Mr Miller** » Fri Oct 02, 2009 10:32 pm

I got the call from my dealer "Jack" is Big Bored and ready to go! I will pick him up tomorrow morning, they even fixed my boo boos from the wheelie incident.

I am PUMPED!!!!!!

Kaos · Post by **Kaos** » Fri Oct 02, 2009 10:43 pm

Mr Miller wrote:I got the call from my dealer "Jack" is Big Bored and ready to go! I will pick him up tomorrow morning, they even fixed my boo boos from the wheelie incident.

I am PUMPED!!!!!!

Sweeet! Let us know how it goes, as far as I know you're the first 171 owner

Mr Miller · Post by **Mr Miller** » Wed Jun 23, 2010 3:39 pm

Well looks like the kit is breaking in finally, I have about 900 mi on the kit. Yesterday I got VooDoo Jack up to 76mph and the acceleration keeps getting stronger:)

gearhead · Post by **gearhead** » Thu Jun 24, 2010 5:15 am

this is awesome! any chance in going to 177cc kit?

Mr Miller · Post by **Mr Miller** » Thu Jun 24, 2010 3:16 pm

No I don't think so, I went with the 171.3 so that I wouldn't need to do any machining. No local dealers around so didn't want to risk breKing anything:)

VeganScoot · Post by **VeganScoot** » Thu Jun 24, 2010 3:44 pm

Very cool...post speed records later