Rear tire keeps going low.

Discussion of Genuine Scooters and Anything Scooter Related

Moderator: Modern Buddy Staff

Post Reply
User avatar
KidDynomite
Member
Posts: 285
Joined: Fri Sep 01, 2006 2:53 pm
Location: Kansas City, MO

Rear tire keeps going low.

Post by KidDynomite »

I had a balding rear tire that went flat on me before I could change it. I replace that tire and now the new tire keeps going flat as well.

Ideas?
You don't wanna get mixed up with a guy like me. I'm a loner Dottie, a REBEL.
User avatar
Tbone
Member
Posts: 389
Joined: Mon Apr 30, 2007 4:09 pm
Location: West Sacramento
Contact:

Post by Tbone »

I had experienced something like that on a pedal bike years ago.

I think there's something wrong with your rim.
"Life Is all about ASS! You're either covering it, laughing it off, kicking it, kissing it, busting it, or trying to get a piece of it!"
User avatar
Drumwoulf
Member
Posts: 810
Joined: Mon Jan 01, 2007 6:49 pm

Re: Rear tire keeps going low.

Post by Drumwoulf »

KidDynomite wrote:I had a balding rear tire that went flat on me before I could change it. I replace that tire and now the new tire keeps going flat as well.

Ideas?
Are you talking about tubed tires or tubeless? If it's tubed, there may be something wrong with the inner tube. The person who mounted the tire may have pinched the tube between the tire and the wheel.

If it's tubeless it may indeed be your metal rim has been dinged or slightly bent somewhere so the tire cannot seal properly against it. If you've ridden thru a pothole or bounced the wheel offa curbs, that could happen. Or maybe the person who mounted the tire may have damaged a part of metal rim or maybe bent the tire's bead so it cannot seal right?

It's also possible that the valve stem could have been improperly installed, or damaged...

In any case I would take the bike (or the dismounted wheel) back to whoever mounted the new tire and explain the problem. A new tire should not leak air! They can soak it again and see where the bubbles are coming from to determine where the leak is...

If you changed the tire yourself it's possible you also may have damaged either the rim or the tire, and you may have to replace either, or both.

Good luck,
drummer
Namaste,
~drummer~

07 Buddy 125
07 Vespa GT200
Hypermotarded
Member
Posts: 23
Joined: Fri Sep 01, 2006 5:27 pm
Location: Seattle, Wa

Post by Hypermotarded »

Unless you're riding a Series Italia, it should be a tubeless tire which either means...

1. the tire you bought was bad

2. your valve is leaking which may have lead to premature wear on the first tire, check to see if its leaking out the mechanism or where the valve seats to the rim (submerging works best)

3. you damaged your rim while riding with a basically flat tire. the new tire is probably fine :) but the rim is not :(. It'll need to be replaced.

Good luck
Ducati Seattle is at your service. If you have buddy questions or needs, call me at (206) 298-9995. Keep the rubber side down out there kids.
User avatar
KidDynomite
Member
Posts: 285
Joined: Fri Sep 01, 2006 2:53 pm
Location: Kansas City, MO

Post by KidDynomite »

Thanks for the help. I'm thinking that of all the options, the valve stem is the problem. Eyeballing the rim shows me nothing. I am taking it to the person who put it on my scoot Friday. I'll see what we find.
You don't wanna get mixed up with a guy like me. I'm a loner Dottie, a REBEL.
Hypermotarded
Member
Posts: 23
Joined: Fri Sep 01, 2006 5:27 pm
Location: Seattle, Wa

Post by Hypermotarded »

As a total aside, I saw Jimmy "JJ" Walker in Vegas. He does standup now and he absolutely will not say Dy-no-mite.

All the other comedians in the show sure do though.
Ducati Seattle is at your service. If you have buddy questions or needs, call me at (206) 298-9995. Keep the rubber side down out there kids.
Post Reply