winter projects

bigbropgo · Post by **bigbropgo** » Thu Sep 30, 2010 1:31 am

Anybody have any tuning plans for this winter? Mornings here are getting a bit crisp but the days are nice. I know its not quite time to put the ride to bed for the season. just wondering if anyone has some cool plans for their scoot.

dynarex · Post by **dynarex** » Thu Sep 30, 2010 2:39 am

winter/summer /spring/fall its all the same here!!!

but im def working on an intake system in the next few months
and a new style variator-tease-tease!

laxer · Post by **laxer** » Thu Sep 30, 2010 2:58 am

I'm gonna repaint and refinish the front panel, look for a brighter headlight, mess with my slider weights a little more, and hopefully add the Arreche 21mm carb. We'll see if it actually all happens, I just bought an $800 pickup truck that needs some love as well.

[email protected] · Post by **[email protected]** » Thu Sep 30, 2010 3:56 pm

im goin to ride this winter alot pbc

Wheelz · Post by **Wheelz** » Thu Sep 30, 2010 4:06 pm

Well I am in florida so, we don't really have a "winter" so to speak, but I am getting a new set of tires for her probly this weekend, nice looking tires with some meat to them I.E. a bit knobby, for the trails. Gonna get a new belt and sliders. Seriously considering getting it wrapped in digital camo and getting a set of saddle bags of some type.
Don't really want to mod the engine too much, cause well, she really is fast enough for the riding I do with her, and I've already grenaded a stock motor can't imagine what i would do to a moded one.

Also looking at an Elite 250 that is a great deal, to add to the stable, that might get the saddle bags though?

Keys · Post by **Keys** » Fri Oct 01, 2010 9:09 pm

Since my Rattler is now paid off, I have stripped it completely down and am building it into a mini-"bobber" type motorcycle thingy. I'll post pics when I learn how.

--Keys

B02S4 · Post by **B02S4** » Fri Oct 01, 2010 10:27 pm

Compression bump.

Keys · Post by **Keys** » Fri Oct 01, 2010 10:59 pm

...as promised...here are the pics. It has been cleaned up a bit since this photo was taken. Have yet to weld in the top-tube, etc. Still looking for just the right tank and seat.

--Keys

bigbropgo · Post by **bigbropgo** » Sat Oct 02, 2010 12:14 am

^

Awsome. I have a ton of curious questions. But I think I'm going to just watch it happen. When I said "mods", I'm just thinkin paint and engine tweaks. Your changing to whole identity. Awsome. How much plastic is going back on? Is it going to run a ridged rear frame? ok ok, so two queations.

Wheelz · Post by **Wheelz** » Sat Oct 02, 2010 2:43 am

bigbropgo wrote:^ Awsome. I have a ton of curious questions. But I think I'm going to just watch it happen. When I said "mods", I'm just thinkin paint and engine tweaks. Your changing to whole identity. Awsome. How much plastic is going back on? Is it going to run a ridged rear frame? ok ok, so two queations.

and a +1

Keys · Post by **Keys** » Sat Oct 02, 2010 3:53 am

bigbropgo wrote: How much plastic is going back on? Is it going to run a ridged rear frame?

No plastic is planned to go back on and I'll be running the wiring loom down the new top tube (under the tank) instead of through the floorboards. As for the rear end, I'll leave it as is, with the shock remaining...I don't like the idea of putting the stress of all those bumps on the engine cases and mounts.

--Keys

[email protected] · Post by **[email protected]** » Sat Oct 02, 2010 8:44 am

nice i love it

jasondavis48108 · Post by **jasondavis48108** » Sat Oct 02, 2010 12:49 pm

thats wild! I'll be curious to see how it turns out.

Wheelz · Post by **Wheelz** » Sun Oct 03, 2010 5:27 am

Funny thing happened to me one the way to get my new tires, I get a flat! On the way to the shop just cruisin along and all the sudden the back gets all "Squishy" and it starts floating all over the place

pulled in to a gas station, and looked that small wear spot I had was now a small hole!
2nd time I've had to put it on a tow truck in a month.
Oh well, I was on the way to the shop anyway, no harm no foul.
While it's there I'm goin ahead and putting the new belt, rollers, and brakes on.
If your tires look like they might be goin bad get them replaced please, I've learned my lesson. Incidentally I did get over 9k miles on that back tire and the front looked like it could go 9 more...

B02S4 · Post by **B02S4** » Mon Oct 04, 2010 2:17 am

Keys wrote:...as promised...here are the pics....

Kinda gives new definition to the phrase "naked bike"

Keys · Post by **Keys** » Sun Oct 31, 2010 3:09 am

Little update...finally found a tank I liked. It's off of some sort of Honda dirt bike...and yes, it WILL be flat black! I've also decided I may keep the original Rattler headlight system. I have it mounted in one pic...tell me what you think. Also, the pic with just the tank and seat and no headlight piece is a little misleading; the tank will be mounted about 2 - 3 inches higher than depicted there. I also think I will be ordering and mounting a metal tractor seat instead of the Rat seat just for kicks. I also reconfigured the wiring harness to follow the new upper back-tube under the tank. Took some doing and stripping of the black tape wound all around it, but I think I got it. Here are the pictures;;;;;

Here it is photoshopped a wee bit (on paint) so you can maybe see it a little better without a buncha junk behind...

--Keys

bigbropgo · Post by **bigbropgo** » Sun Oct 31, 2010 4:51 am

You have murdered your rat. I love it.

Wheelz · Post by **Wheelz** » Sun Oct 31, 2010 5:30 am

WOW KEYS! that is all I can say, you were not kidding when you said you had a project goin...

B02S4 · Post by **B02S4** » Sun Oct 31, 2010 1:47 pm

Keys, you are one radical SOB!

Keys · Post by **Keys** » Sun Oct 31, 2010 6:48 pm

Okay. A couple concepts...I'm asking for your input. One, with projector driving lights only and the other with projectors AND Rattler headlight set-up. Whattaya think? Which one? I'm leaning toward the projectors ONLY, but I'm still soliciting input...

--Keys

bigbropgo · Post by **bigbropgo** » Sun Oct 31, 2010 9:01 pm

Ratbike.org. quite a few gems. Total ruckus has a "scooters of the apocalypse " thread that's 76 pages long. They also have a skelly crew with a bunch of stripped down Honda elites. Tons of cool stuff.

I'd maybe do a combo of both light setups. I thing the projector would prob be an upgrade for lighting. The stock plastic would protect the ignition switch,horn and blinker relay. But you could cut it up too. Dunno, cool project though. I think the stock seat still looks good. If the ped bucket is gone and the fuel tank, you could lower the seat a bit. This is your vision, so do yo thang.

Keys · Post by **Keys** » Mon Nov 01, 2010 12:24 am

Bucket and tank are already gone. Sits about 3 inches lower in the seat right now...

--Keys

B02S4 · Post by **B02S4** » Mon Nov 01, 2010 1:41 pm

I like the quad light setup. The modified pig-nose is true to the heritage.

Wheelz · Post by **Wheelz** » Tue Nov 02, 2010 3:25 am

I second the 4 light setup looks good, I like that you can't see all the "guts" underneath it.

Keys · Post by **Keys** » Tue Nov 02, 2010 4:13 pm

...a little more progress on the Ratster. Using the original floorboard...I need to cut it down a bit to look just right. I'm also going to be using a flat-style seat (I'll make it myself) in roughly the shape of the one in the picture. Padded, though...

--Keys

Keys · Post by **Keys** » Wed Nov 03, 2010 1:08 pm

bigbropgo wrote:Ratbike.org. The stock plastic would protect the ignition switch,horn and blinker relay.

Horn? I have a finger. Blinkers? I have arms.

...and yes, ratbike.org is a hoot of a site...I'm on it several times a week. Will be submitting pics of the "Rattster" when finished.

--Keys

Lostmycage · Post by **Lostmycage** » Thu Nov 04, 2010 2:16 am

Genius!

vespatech · Post by **vespatech** » Fri Nov 05, 2010 6:21 pm

clean up the frame below the tank and put some nice footpegs

robby · Post by **robby** » Sat Nov 06, 2010 5:48 pm

Nice work. That thing is all kinds of awesome.

Keys · Post by **Keys** » Fri Nov 12, 2010 1:38 am

A little bit more...took it for it's maiden ride this afternoon! What a HOOT! And no, the lights, etc. are NOT final.

--Keys

bigbropgo · Post by **bigbropgo** » Fri Nov 12, 2010 1:49 am

Lookin good. I didn't really think about it before, but with a fuel tank that size you could ride for days.

jwarfield · Post by **jwarfield** » Fri Nov 12, 2010 7:56 pm

I'm puttin sliders and a 1500 spring this afternoon. Just got back from Scootertronics and now have more ideas than $$. They are super knowledgeable aout the craft of scoot tuning. www.scootertronics.com

Next I'll be swappin out the factory handlebar and gauge cluster

Keys · Post by **Keys** » Sat Nov 13, 2010 2:40 am

Well, I ended up putting the original headlight back on...also bought some new black drag bars and put them on. Better. Still considering a homemade seat...don't really like the original on that custom (botched) a scooter. No pics yet...maybe tomorrow...

--Keys

Keys · Post by **Keys** » Sat Nov 13, 2010 8:25 pm

More pics with the original headlight and the new handlebars...

...and next to my um, step-grandson's SV650...

--Keys