I love the idea and I would be very interested as well but i think the vector could use some work.
don't mean to insult anyone here, but the typeface is incorrect. :-/ if you can't find the right one I would just take a large picture of the old one and trace a vector on top of it.
Would be looking at somewhere between $7 and $11 per badge, based on the run size.
If there is continued interest in this (please vote in the poll above and leave comments below) I will set up a pay pal or visa payback type thing and move forward.
Would be looking at somewhere between $7 and $11 per badge, based on the run size.
If there is continued interest in this (please vote in the poll above and leave comments below) I will set up a pay pal or visa payback type thing and move forward.
that looks awesome!
if i had to knitpick, there's only three little things that could use some work:
1. the terminal (tops piece) on the lower case a should come out a bit more, you could also try slightly enlarging the counter (negative space).
2. the serif's on the lower case l's still seem a bit vertically fat. you could try reducing them and reducing the curvature between them and the stem (main section of the letter)
3. the terminal (little tail) on the lower case t is scrunched in a bit too much. You could re-extend the cross stroke like you had in your first attempt and stretch the terminal back out to meet it vertically.
I might be in for some. I have a couple of the old ones!
double-o-soul wrote:that looks awesome!
if i had to knitpick, there's only three little things that could use some work:
1. the terminal (tops piece) on the lower case a should come out a bit more, you could also try slightly enlarging the counter (negative space).
2. the serif's on the lower case l's still seem a bit vertically fat. you could try reducing them and reducing the curvature between them and the stem (main section of the letter)
3. the terminal (little tail) on the lower case t is scrunched in a bit too much. You could re-extend the cross stroke like you had in your first attempt and stretch the terminal back out to meet it vertically.
props bro! its looking good.
+1
Primavera is probably not the best place to start—it's an attempt to build an entire typeface out of the letters in "vespa." Starting with a professional, better balanced face might be better because all the "t" and "l" are much better and the "s" and "a" are pretty close.
The actual "Vespa" serif logo may be based in a typeface, but I haven't found an exact match. It's probably custom type. I can't imagine someone designing a "p" that goofy for anything else.
Eric // LA Scooter Meetup Group // Stella 4T // Vespa LX // Vespa LXS // Honda Helix // some, uh, projects…
DCUNITED4LIFE wrote:This is one of those instances when my mom said "if you can't say anything nice"
That's funny, I remember someone taking 15 minutes to start his vintage P this past Sunday
Fifteen minutes? was he trying to start it by hand?
Wow, I'm surprised if it takes more than three kicks to start on a cold morning. Two on a warm morning and one once the bike has been run. It's a Ducati CDI ignition; points went away on the P series.
At what point does a hobby become an addiction? I'm uncertain, but after the twelfth scooter, it sorta feels like the latter...
JohnKiniston wrote:The gas could have been off, or the Ignition or Kill switch, or maybe the wiring fell apart and he lost spark.
Maybe his kicker fell off and he was trying to bump start it?
Oh, a wiseguy!
Remind me the next time my bike acts up to drop it off at my buddy's place and let him deal with it.
Note: My kicker did snap off while leaving work one night. Bump started it within two tries.
The green "kill" wire to the CDI has failed before too, but I disconnected it to get by and repaired it before the next big ride. About 35% of that wire is now new.
EDIT: In response to the jab below, I expected the eventual failure of the OEM plug boot and had a brand-new NGK boot in the glovebox and swapped it out roadside in under five minutes.
Ride vintage, plan on crap breaking, carry spares and worry less!
Last edited by az_slynch on Wed Oct 03, 2012 11:23 pm, edited 1 time in total.
At what point does a hobby become an addiction? I'm uncertain, but after the twelfth scooter, it sorta feels like the latter...
DCUNITED4LIFE wrote:This is one of those instances when my mom said "if you can't say anything nice"
That's funny, I remember someone taking 15 minutes to start his vintage P this past Sunday
True, but you've seen the pics on FB. The oil injection lines were installed incorrectly or came loose, hence serious issues with fuel delivery. Let's not get confused either, mechanically, a Stella is virtually a PX. I'm just saying I don't care for the Stella badge in Vespa typeface. Keep it up Italian....I'll be raging hard at the Vintage rally this weekend while you'll be grading papers in your speedo!
JohnKiniston wrote:The gas could have been off, or the Ignition or Kill switch, or maybe the wiring fell apart and he lost spark.
Maybe his kicker fell off and he was trying to bump start it?
Nah, I just rebuilt the bike and fuel delivery is still an issue. The thing floods all the time. Not work that I performed because I don't have the wrench for the fuel tap which was replaced for a euro style one. Lokky will be sorry when I have to save his ass on the side of the road when he experiences a breakdown and I go all MacGyver on his Stella.....shit, I already pulled all the front disk parts off his wrecked bike to do a conversion on mine. I helped rescue him that time, also found a friend with a trailer for when we were out riding and we BOTH almost went down in some camouflage gravel and he ended up wiping out, and most of all, he seems to forget how I've upped his lady game in this town by 500%. That's a true statistic as well. He also neglected to mention my P was a $600 basket case left outside to die for 15+ years after being asspolded by the PO. In 2-3 months I rebuilt the engine and have sorted most of the issues with it. http://modernvespa.com/forum/topic102160 when it's not flooded or the plug isn't fouled from running 3-4% oil on a new cylinder, it's a 2 kick bike. I'll see you at scoot club tonight Lokky....oh yes, I will see you!!!!!!!!! HAHAHAHAHAH!
Glad to see someone giving this a go again. I got pretty burned out on stuff like this, but not everyone does!
FWIW, *I* did not start these the last 2 times around (from StellaSpeedForums) but it was mintwood
(that thread ended up 15 pages long, then there were a few more threads on the follow up rounds! heh)
