What is new for 2013 from Genuine?
Moderator: Modern Buddy Staff
-
- Member
- Posts: 74
- Joined: Thu Mar 11, 2010 5:08 pm
- Location: Redmond, Washington
What is new for 2013 from Genuine?
Any ideas on what will be coming in the way of new scooters, improvements, or updates on scooters coming out of Genuine in this coming year?
Rumors?
Confirmed info?
Rumors?
Confirmed info?
- Dooglas
- Moderator
- Posts: 4373
- Joined: Sun Jul 08, 2007 2:17 am
- Location: Oregon City, OR
On the long list of things Genuine might do, that particular one must be near the bottom. Now, PGO is certainly capable of producing a bike in that class but, if you are truly interested in a 350 highway machine - go test ride a BV 350Stitch wrote:*fingers crossed* 350cc Stella.

- Stitch
- Member
- Posts: 509
- Joined: Tue Jun 12, 2012 6:12 pm
- Location: Port royal Pa
I can get a used helix, seca 2, p200e, and a moped for what the bv costs.
And pieces fall off my current Stella. I don't see why a 350 would be worse.
We can even modernize it. 350cc 4t, with a five speed, water cooled, fuel injected, and with a five gallon top tank. Maybe throw in some tubeless tires while you are at it. Taadaa! A commuter scooter.
And pieces fall off my current Stella. I don't see why a 350 would be worse.
We can even modernize it. 350cc 4t, with a five speed, water cooled, fuel injected, and with a five gallon top tank. Maybe throw in some tubeless tires while you are at it. Taadaa! A commuter scooter.
"Stella" is Latin for "use threadlocker on all fasteners"
- az_slynch
- Member
- Posts: 1927
- Joined: Wed Sep 12, 2012 4:56 pm
- Location: Tucson, AZ
Just get a P200E, swap in a 62mm stroker and kit it with a Pinasco 215 kit. You'll have 232ccs of grunt and enough torque to pull long gears. Might be worth looking at a 2T EFI kit to offset the thirst of that sort of setup. Tubeless is easy, rims are finally available. Get some 10" tires that have a speed rating higher than "J" (62mph) and a Stella fork and headset for real brakes.Stitch wrote:We can even modernize it. 350cc 4t, with a five speed, water cooled, fuel injected, and with a five gallon top tank. Maybe throw in some tubeless tires while you are at it. Taadaa! A commuter scooter.
Frankly, my biggest concern would be the capabilities of the chassis. I've had the P over 75 on an 8% downhill grade and it was a bit hairy to ride at that speed.
Last edited by az_slynch on Fri Dec 14, 2012 6:26 pm, edited 1 time in total.
At what point does a hobby become an addiction? I'm uncertain, but after the twelfth scooter, it sorta feels like the latter...
Seriously...I've lost count...
Seven mopeds ...that's still manageable...
Seriously...I've lost count...
Seven mopeds ...that's still manageable...
- RoaringTodd
- Member
- Posts: 690
- Joined: Mon Jul 23, 2012 3:45 pm
- Location: Philly, PA
- az_slynch
- Member
- Posts: 1927
- Joined: Wed Sep 12, 2012 4:56 pm
- Location: Tucson, AZ
The LML Star automatic is currently available as a 125 only. The engine is GY6-based, so maybe there will be a 150 and a 170-180cc variant. A 200 would probably required a lot of modification and don't know how well that would work. It seems as though the 125cc has a lot of extra chassis louvers and air-routing ductwork as-is. The extra heat generated by a 200 might not be managable for the chassis and it's extra cooling.RoaringTodd wrote:Fingers crossed for a 200cc CVT Stella too...
At what point does a hobby become an addiction? I'm uncertain, but after the twelfth scooter, it sorta feels like the latter...
Seriously...I've lost count...
Seven mopeds ...that's still manageable...
Seriously...I've lost count...
Seven mopeds ...that's still manageable...
- RoaringTodd
- Member
- Posts: 690
- Joined: Mon Jul 23, 2012 3:45 pm
- Location: Philly, PA
Has anyone called you a Scrooge lately? Its Christmas, and one can dream....az_slynch wrote:A 200 would probably required a lot of modification and don't know how well that would work. The extra heat generated by a 200 might not be managable for the chassis and it's extra cooling.
Just because I am Deaf ... does not mean I can't roar.
- az_slynch
- Member
- Posts: 1927
- Joined: Wed Sep 12, 2012 4:56 pm
- Location: Tucson, AZ
I've been called worse lately, but that's besides the point.RoaringTodd wrote: Has anyone called you a Scrooge lately? Its Christmas, and one can dream....

LML has delivered on the "vintage bike with a modern engine", and that's the wish that needed to be fulfilled. I can all-but-guarantee that this machine will perform more like a modern bike than the geared Stellas ever will and that even with a 150cc it will give a 200cc geared Stella a run for it's money. My old P-series 200 has been given a good race by a 125cc Buddy, so I think it's not too much of a stretch for GY6-engined Stella to perform in a similar manner.
My point is, don't worry about the engine size thats tagged on the bodywork; it's marketing hype. Forget what you know of Stella performance, because the automatic is a whole different animal. Just be jazzed that it's no longer a pipe dream and focus your dreams on it finding it's way here sooner than later.

At what point does a hobby become an addiction? I'm uncertain, but after the twelfth scooter, it sorta feels like the latter...
Seriously...I've lost count...
Seven mopeds ...that's still manageable...
Seriously...I've lost count...
Seven mopeds ...that's still manageable...
- Stitch
- Member
- Posts: 509
- Joined: Tue Jun 12, 2012 6:12 pm
- Location: Port royal Pa
You would need a slightly longer wheelbase, and maybe a little stronger frame. Maybe change the rake a little bit too. I would just like to see genuine stomp the old p200's.az_slynch wrote:Just get a P200E, swap in a 62mm stroker and kit it with a Pinasco 215 kit. You'll have 232ccs of grunt and enough torque to pull long gears. Might be worth looking at a 2T EFI kit to offset the thirst of that sort of setup. Tubeless is easy, rims are finally available. Get some 10" tires that have a speed rating higher than "J" (62mph) and a Stella fork and headset for real brakes.Stitch wrote:We can even modernize it. 350cc 4t, with a five speed, water cooled, fuel injected, and with a five gallon top tank. Maybe throw in some tubeless tires while you are at it. Taadaa! A commuter scooter.
Frankly, my biggest concern would be the capabilities of the chassis. I've had the P over 75 on an 8% downhill grade and it was a bit hairy to ride at that speed.
"Stella" is Latin for "use threadlocker on all fasteners"
- az_slynch
- Member
- Posts: 1927
- Joined: Wed Sep 12, 2012 4:56 pm
- Location: Tucson, AZ
I promise that it doesn't take that much. I built Howardr's Stella after the big end failure. It's only 175cc, but it will stomp a stock P200 in acceleration and soon, top speed. The cylinder is a Malossi 166, the crank is a Mazzuchelli 60mm stroker and the exhaust is a SIP Road, but the rest of it is pretty stock.Stitch wrote:You would need a slightly longer wheelbase, and maybe a little stronger frame. Maybe change the rake a little bit too. I would just like to see genuine stomp the old p200's.
I also built a 187cc Fireball, and it will whip a P200 on level ground. Add in an uphill grade and it was even worse on the P.
Both still run Autolube and a 20mm Carb. Dell'Orto #3 slide for the Malossi kit, the the rest was just jetting.
At what point does a hobby become an addiction? I'm uncertain, but after the twelfth scooter, it sorta feels like the latter...
Seriously...I've lost count...
Seven mopeds ...that's still manageable...
Seriously...I've lost count...
Seven mopeds ...that's still manageable...
- Stitch
- Member
- Posts: 509
- Joined: Tue Jun 12, 2012 6:12 pm
- Location: Port royal Pa
- RoaringTodd
- Member
- Posts: 690
- Joined: Mon Jul 23, 2012 3:45 pm
- Location: Philly, PA
- Dooglas
- Moderator
- Posts: 4373
- Joined: Sun Jul 08, 2007 2:17 am
- Location: Oregon City, OR
If you mean compete performance-wise - it ain't gonna happen. A water-cooled 200/250/300 Vespa puts out so much more power than the older design Stella 2T and 4T engines that they just aren't going to be in the same ballgame. If you mean who will buy what - everyone has their personal preferences, of course, and many things drive that.RoaringTodd wrote:I'm still holding out hope for a vintage styled automatic that can compete with the modern Vespas... and with 200 or more cc's.
- RoaringTodd
- Member
- Posts: 690
- Joined: Mon Jul 23, 2012 3:45 pm
- Location: Philly, PA
In other words - repackage the Blur into a vintage style scooter.... with a flat seat.Dooglas wrote:If you mean compete performance-wise - it ain't gonna happen. A water-cooled 200/250/300 Vespa puts out so much more power than the older design Stella 2T and 4T engines that they just aren't going to be in the same ballgame. If you mean who will buy what - everyone has their personal preferences, of course, and many things drive that.RoaringTodd wrote:I'm still holding out hope for a vintage styled automatic that can compete with the modern Vespas... and with 200 or more cc's.
Just because I am Deaf ... does not mean I can't roar.
-
- Dealer
- Posts: 195
- Joined: Fri May 20, 2011 8:00 pm
- Location: Dallas, Tx
- mattgordon
- Member
- Posts: 730
- Joined: Fri Jun 23, 2006 3:40 am
- Location: Temecula, CA
I'm of the opinion that bigger, faster scooters and "vintage styling" aren't going to be found on the same scooter as products tend to evolve. From any manufacturer. Sure there will be vintage styling cues, but not vintage styling.Dooglas wrote:If you mean compete performance-wise - it ain't gonna happen. A water-cooled 200/250/300 Vespa puts out so much more power than the older design Stella 2T and 4T engines that they just aren't going to be in the same ballgame. If you mean who will buy what - everyone has their personal preferences, of course, and many things drive that.RoaringTodd wrote:I'm still holding out hope for a vintage styled automatic that can compete with the modern Vespas... and with 200 or more cc's.
IMO that is why Vespa still offers legacy products (in some markets, not here) and newer, modern-er (?) Vespas for those wanting more performance.
- viney266
- Member
- Posts: 2270
- Joined: Thu May 19, 2011 8:49 pm
- Location: westminster md
- Contact:
- Dooglas
- Moderator
- Posts: 4373
- Joined: Sun Jul 08, 2007 2:17 am
- Location: Oregon City, OR
Well, sure. A bigger PGO in the Genuine line has always been a possibility. Could be a 250. 350, or 500. The question, though, is whether people like Phil McCaleb see any signs that it would sell well. The 220 Blur certainly does not. Piaggio and Aprilia have discontinued their 500 scooters in the US and pinned their hopes on the 350 engine. I think it would take a real sales success to convince Genuine that it would be worth doing. The only real success in the US among larger scooters has been the 250/300 GTS Vespa. That is certainly a more powerful ride than the small frame scooters and has maintained some classic styling along with modern mechanical features - but is also fairly spendy. I would guess that the industry is carefully watching sales of the BV 350 in the US for signs of where to go next. The 350 has buckets of power, is mechanically innovative, and is less expensive than a Vespa GTS - but will it be a sales success?sc00ter wrote:A 250 liquid-cooled Blur like they get overseas.
- Stitch
- Member
- Posts: 509
- Joined: Tue Jun 12, 2012 6:12 pm
- Location: Port royal Pa
If the batman rainbow unicorn Stella ever hits the showroom floor, ill be in line with my checkbook or 3 kidneys (if I happen to be more than 2nd in line).viney266 wrote:^^^^ I put my deposit down over 2 years ago...STILL waiting.Syd wrote:Peabody and I are anxiously awaiting this:
"Stella" is Latin for "use threadlocker on all fasteners"
- Stitch
- Member
- Posts: 509
- Joined: Tue Jun 12, 2012 6:12 pm
- Location: Port royal Pa
In a podcast interview this spring, The Leader Dork said they were expecting a high percentage of sales to be new riders, and that they usually end up in the 50cc to 250cc range.
Honest guess, maybe a special model, and maybe some upgrades to the existing lineup (suspension and brakes a lá Psycho). And maybe an auto Stella.
Honest guess, maybe a special model, and maybe some upgrades to the existing lineup (suspension and brakes a lá Psycho). And maybe an auto Stella.
"Stella" is Latin for "use threadlocker on all fasteners"
- az_slynch
- Member
- Posts: 1927
- Joined: Wed Sep 12, 2012 4:56 pm
- Location: Tucson, AZ
We could just be goofballs and hunt down a wrecked Blur 220i and graft the driveline into a new auto Stella to make a vintage-style sport-tourer. I can imagine the badging now: Stella 220 STi...Stitch wrote:In a podcast interview this spring, The Leader Dork said they were expecting a high percentage of sales to be new riders, and that they usually end up in the 50cc to 250cc range.
Honest guess, maybe a special model, and maybe some upgrades to the existing lineup (suspension and brakes a lá Psycho). And maybe an auto Stella.

At what point does a hobby become an addiction? I'm uncertain, but after the twelfth scooter, it sorta feels like the latter...
Seriously...I've lost count...
Seven mopeds ...that's still manageable...
Seriously...I've lost count...
Seven mopeds ...that's still manageable...
-
- Member
- Posts: 1282
- Joined: Sun Mar 30, 2008 9:17 pm
- Location: Norfolk VA
I fully understand Dooglas! No manufacturer wants to get stuck with a poor selling product. Or a importer either. Or a dealer! I really like the new Vespas, but the price is a tad steep for cheap transportation to me. Always loved the Kymco GrandVista but I had a People 250 for a short while, so I will just keep my distance. The thing is, all of us want a cheap price-but not poorly made China junk. One half wants rocket bike styling, the other half wants retro. The Buddy to me is like a VW Bug. It can be made into a little racer, sensible run-about (thats me), rat bike, cute, old school retro, etc. Being reliable helps also. But a liquid cooled 250 Blur...... That could sway me!