Changing my Ride. Need some feedback.
Moderator: Modern Buddy Staff
- Scooterboi
- Member
- Posts: 157
- Joined: Thu Sep 08, 2011 7:06 pm
- Location: Lakewood, CO
Changing my Ride. Need some feedback.
To make a long story short I am selling my good friend of the last year and a half and going with the BV350. I have thoroughly enjoyed riding my B125 the last 18 months but I just need a bigger ride. Driving across the big city or going for distance in the mountains is simply not what it was designed for. Still, most of my driving will be still be in city (commute, grocer, P.O., local club rides, etc.) so going to a M/C would not work. I have been weighing my options since last September and 300cc/liquid cooled quickly became the sweet spot for me. I don't have the space or money to collect a stable so whatever I get is going to be "the one" for a long time.
I've done my homework and I feel pretty certain that I would be happy with the BV350, but the simple fact is you cannot find one for a test drive in the Denver area. Every one that comes here is either sold as soon as it goes to the showroom or is ordered by the eventual owner. I have sat on and ridden the BV500 and am told the ergs are the same but I am still a little concerned.
I've not heard a single bad word about the BV350 except that the glove box gets pretty warm on long rides (DUHH! Radiator right there.) but I am set to pull the trigger this Saturday and just order one. Before I did, I figured I would put it out there just in case. SO . . Any feedback out there on this? Any buyers remorse?
<I am also thinking of putting this out on the MV site but (frankly) I doubt their objectivity. Most of their membership seems to only have owned Vespa/Aprillia/Piaggio (or at least they hardly ever admit to other rides) and are quite vocal about its superiority.>
I've done my homework and I feel pretty certain that I would be happy with the BV350, but the simple fact is you cannot find one for a test drive in the Denver area. Every one that comes here is either sold as soon as it goes to the showroom or is ordered by the eventual owner. I have sat on and ridden the BV500 and am told the ergs are the same but I am still a little concerned.
I've not heard a single bad word about the BV350 except that the glove box gets pretty warm on long rides (DUHH! Radiator right there.) but I am set to pull the trigger this Saturday and just order one. Before I did, I figured I would put it out there just in case. SO . . Any feedback out there on this? Any buyers remorse?
<I am also thinking of putting this out on the MV site but (frankly) I doubt their objectivity. Most of their membership seems to only have owned Vespa/Aprillia/Piaggio (or at least they hardly ever admit to other rides) and are quite vocal about its superiority.>
- skully93
- Member
- Posts: 2597
- Joined: Sat Dec 31, 2011 3:54 pm
- Location: Denver CO
Bob White, our local photographer and 'most interesting man in the world', bought one. You might see if you can get in touch with him (or if he shows up to the Misfits ride on Sat). He let me sit astride his, I found it to be very comfortable, and we're of comparable size. I didn't test ride it though.
- Scooterboi
- Member
- Posts: 157
- Joined: Thu Sep 08, 2011 7:06 pm
- Location: Lakewood, CO
- skully93
- Member
- Posts: 2597
- Joined: Sat Dec 31, 2011 3:54 pm
- Location: Denver CO
- Scooterboi
- Member
- Posts: 157
- Joined: Thu Sep 08, 2011 7:06 pm
- Location: Lakewood, CO
- Syd
- Member
- Posts: 4686
- Joined: Wed Jul 18, 2007 6:41 am
- Location: Tempe
How tall (and in particular how long of leg) are you? At six-three/34" inseam, the seat is almost too short. I could ride it, and just might if the Unicorn doesn't come in, but it would be the slightest bit tight.
Have you looked at the SYM HD200? It doesn't have the ponies of the BV350, but it's very capable, similar in style, and boatload less $.
Have you looked at the SYM HD200? It doesn't have the ponies of the BV350, but it's very capable, similar in style, and boatload less $.
The majority is always sane - Nessus
- Scooterboi
- Member
- Posts: 157
- Joined: Thu Sep 08, 2011 7:06 pm
- Location: Lakewood, CO
180 lbs 5'10" 33" inseam
I have sat on and test drove the Kymco 300 GTi (and which is supposedly an inch taller) and had no problems. Not flat footed but still easy to handle. Even if I flat footed on one side with the BV500 there was no problem.
I had considered the HD200 and it is a great scoot. I just don't think it has the power to get me through Eisenhower Tunnel and not be road pizza. Carb vs. EFI (altitude really sucks the top end out of a carb) and the lower horses were the deciding factors.
I have sat on and test drove the Kymco 300 GTi (and which is supposedly an inch taller) and had no problems. Not flat footed but still easy to handle. Even if I flat footed on one side with the BV500 there was no problem.
I had considered the HD200 and it is a great scoot. I just don't think it has the power to get me through Eisenhower Tunnel and not be road pizza. Carb vs. EFI (altitude really sucks the top end out of a carb) and the lower horses were the deciding factors.
- Scooterboi
- Member
- Posts: 157
- Joined: Thu Sep 08, 2011 7:06 pm
- Location: Lakewood, CO
Seriously psyched myself but suddenly having this "too good to be true" feeling. That and a one month wait time.
and <sigh>
Don't really know what I would do if it were here right now. I would want to learn how to handle a new bike in this weather. It's freaking snowing outside! and I rode to work! I might just end up walking the buddy home or riding really <really> slow.

Don't really know what I would do if it were here right now. I would want to learn how to handle a new bike in this weather. It's freaking snowing outside! and I rode to work! I might just end up walking the buddy home or riding really <really> slow.

- JHScoot
- Member
- Posts: 2745
- Joined: Tue Jul 13, 2010 11:05 pm
- Location: Los Angeles
i have a 32in inseam and found the BV350 a bit cramped just sitting on it. i moved around and tried different foot positions, but to no avail. its a big scooter that didn't feel small, just not good enough leg / hip / knee ergos for me. i couldn't imagine feeling confident riding it at high speed or cornering. BUT when you ride body position changes, and a comfort zone can sometimes be found. so simply sitting on a stationary scoot can sometimes not be a good indicator. which is why yes, the "test ride" is always best imo. but not always possible, strangely enough. however i recall getting off the BV and shaking my head in disappointment, as it was just another big scoot to be scratched from my list and got me looking motorcycleScooterboi wrote:180 lbs 5'10" 33" inseam
I have sat on and test drove the Kymco 300 GTi (and which is supposedly an inch taller) and had no problems. Not flat footed but still easy to handle. Even if I flat footed on one side with the BV500 there was no problem.
I had considered the HD200 and it is a great scoot. I just don't think it has the power to get me through Eisenhower Tunnel and not be road pizza. Carb vs. EFI (altitude really sucks the top end out of a carb) and the lower horses were the deciding factors.
its not the reach of the feet to the ground that is ever a prob with longer inseam riders like us. its the reach to the foot board on a scoot and the pegs on a cycle that bother. the ground is easily reached, but how high the foot board is and how close the seat is what bothers most
i don't like my knees above my hips when i ride. as if i am sitting in a too short chair. i can fire off a list of big scoots, including maxi's, where this happens no matter where my ass is or my feet are placed. meh
you mentioned SYM. how about a CityCom? those are sweet and i am pretty sure seating will be good, as it is for myself

Riding is riding
- Scooterboi
- Member
- Posts: 157
- Joined: Thu Sep 08, 2011 7:06 pm
- Location: Lakewood, CO
- skully93
- Member
- Posts: 2597
- Joined: Sat Dec 31, 2011 3:54 pm
- Location: Denver CO
for us here it would probably be more of an issue that few Syms are sold, and no local dealer. That doesn't make them bad (I've only heard good things), but it does mean we can get left high and dry. if the BV fits, then at least there are multiple dealers that can support it.
If I go bigger I might look at a motorcycle too, only because its similar priced to the bv350. depending on the model though, the MPG and storage on the scooter...mmmmm
If I go bigger I might look at a motorcycle too, only because its similar priced to the bv350. depending on the model though, the MPG and storage on the scooter...mmmmm
- Scooterboi
- Member
- Posts: 157
- Joined: Thu Sep 08, 2011 7:06 pm
- Location: Lakewood, CO
- ericalm
- Site Admin
- Posts: 16842
- Joined: Sat Jun 10, 2006 3:01 am
- Location: Los Angeles, CA
- Contact:
The BV350 is a great scoot all around. I know a few happy owners around here.Scooterboi wrote:180 lbs 5'10" 33" inseam
I have sat on and test drove the Kymco 300 GTi (and which is supposedly an inch taller) and had no problems. Not flat footed but still easy to handle. Even if I flat footed on one side with the BV500 there was no problem.
I had considered the HD200 and it is a great scoot. I just don't think it has the power to get me through Eisenhower Tunnel and not be road pizza. Carb vs. EFI (altitude really sucks the top end out of a carb) and the lower horses were the deciding factors.
But the ergonomics may be an issue for you. I'm 5' 11" but only have a 30" inseam and found the seating position a bit cramped and weird.
At the same time, riders often adapt to their rides. I know Buddy riders who are MUCH longer legged than I am and very comfy and happy to go long distances.
Pretty sure the newer SYM HD200 (the Evo) has EFI.
Eric // LA Scooter Meetup Group // Stella 4T // Vespa LX // Vespa LXS // Honda Helix // some, uh, projects…
- ravenlore
- Member
- Posts: 528
- Joined: Fri Aug 19, 2011 12:30 pm
- Location: Minneapolis MN
- mattgordon
- Member
- Posts: 730
- Joined: Fri Jun 23, 2006 3:40 am
- Location: Temecula, CA
Re: Changing my Ride. Need some feedback.
Ive had my BV-350 for a week. Just like the golden arches..."I'm lovin' it".Scooterboi wrote:To make a long story short I am selling my good friend of the last year and a half and going with the BV350. I have thoroughly enjoyed riding my B125 the last 18 months but I just need a bigger ride. Driving across the big city or going for distance in the mountains is simply not what it was designed for. Still, most of my driving will be still be in city (commute, grocer, P.O., local club rides, etc.) so going to a M/C would not work. I have been weighing my options since last September and 300cc/liquid cooled quickly became the sweet spot for me. I don't have the space or money to collect a stable so whatever I get is going to be "the one" for a long time.
I've done my homework and I feel pretty certain that I would be happy with the BV350, but the simple fact is you cannot find one for a test drive in the Denver area. Every one that comes here is either sold as soon as it goes to the showroom or is ordered by the eventual owner. I have sat on and ridden the BV500 and am told the ergs are the same but I am still a little concerned.
I've not heard a single bad word about the BV350 except that the glove box gets pretty warm on long rides (DUHH! Radiator right there.) but I am set to pull the trigger this Saturday and just order one. Before I did, I figured I would put it out there just in case. SO . . Any feedback out there on this? Any buyers remorse?
<I am also thinking of putting this out on the MV site but (frankly) I doubt their objectivity. Most of their membership seems to only have owned Vespa/Aprillia/Piaggio (or at least they hardly ever admit to other rides) and are quite vocal about its superiority.>
I'm 5'8"ish and have no issues with the ergos. Or the power. Or the braking. I'm seriously wondering if I'll ever ride my Vespa GTS250 again. The BV feels like you could have it take you anywhere regardless of how far. We will be riding ours into Utah this late summer. Oh, my wife bought one too. Her GT200L is now chilling in the garage. (It's been very reliable in comparison to the GTS)
I only hope my BV proves to be more reliable than my GTS...which has been finicky and expensive to keep on the road since I bought it new in '06. Yes, its a very early model. I'm pretty certain it will be though. Like you, Ive not heard a disparaging word about the BV-350 anywhere and I've looked.
Enjoy it, I know I will!
- Scooterboi
- Member
- Posts: 157
- Joined: Thu Sep 08, 2011 7:06 pm
- Location: Lakewood, CO
DID!
I was able to flat foot while it was on the stand with a little stretch. On the ride, I was able to put both feet down comfortably solid.
Different (more stable) feel than the little guy once it got faster than around 20 mph. At low speeds it was not quite as agile, but what do you expect from a 16" front wheel vs. 10". Still, with only a little more effort I was able to swing that extra foot diameter where I wanted, no problem. The weirdest part was not being able to put my feet together like I can on the Buddy. Not bad weird, just different and I can definitely get used to it!
Put the down on the black one after our club ride yesterday and just got off Amazon this morning ordering the GPS mount, horn, and other "bling." "Jet" will here in about a month which is a good thing. March is our heaviest snow month and I don't want to be adjusting to a new bike on bad roads. Regardless, at our next club ride it is very likely I will have a few more horses to play with! (YAY!)
BTW, a very large THANK YOU to Bob for letting us ride his two week old precious. And not even past the break in period!
And thank you, MB, for the great response (as usual.) Without all the information and knowledgeable membership on this site I would still be searching rather than anticipating the new ride.

I was able to flat foot while it was on the stand with a little stretch. On the ride, I was able to put both feet down comfortably solid.
Different (more stable) feel than the little guy once it got faster than around 20 mph. At low speeds it was not quite as agile, but what do you expect from a 16" front wheel vs. 10". Still, with only a little more effort I was able to swing that extra foot diameter where I wanted, no problem. The weirdest part was not being able to put my feet together like I can on the Buddy. Not bad weird, just different and I can definitely get used to it!

Put the down on the black one after our club ride yesterday and just got off Amazon this morning ordering the GPS mount, horn, and other "bling." "Jet" will here in about a month which is a good thing. March is our heaviest snow month and I don't want to be adjusting to a new bike on bad roads. Regardless, at our next club ride it is very likely I will have a few more horses to play with! (YAY!)
BTW, a very large THANK YOU to Bob for letting us ride his two week old precious. And not even past the break in period!
And thank you, MB, for the great response (as usual.) Without all the information and knowledgeable membership on this site I would still be searching rather than anticipating the new ride.

- Scooterboi
- Member
- Posts: 157
- Joined: Thu Sep 08, 2011 7:06 pm
- Location: Lakewood, CO
One of the things I asked Sportique (Englewood) to do is give me an estimate on what it would take to hook up the Euro turn signals. My plan is to have both work.
That and I am going with a Shad 48 topcase.
Yes, I know. Report and pics as it happens . . .
I have a serious case of "permagrin" and it's not even here yet!
That and I am going with a Shad 48 topcase.
Yes, I know. Report and pics as it happens . . .
I have a serious case of "permagrin" and it's not even here yet!

- peabody99
- Member
- Posts: 1775
- Joined: Thu Jun 15, 2006 2:19 am
- Location: San Diego
I don't think you'll be disappointed. My spouse test road both the bv 250, 500 and rode my gts quite a bit. When he test rode the 350 it was all over. It was the best of the bunch hands down in his opinion. He loves it. the displacement is perfect for his freeway commute, and it is narrow enough for urban lane splitting. I have not gotten the nerve to ride it yet, because it is tall and heavy for me. I have an insanely short inseam 

- mattgordon
- Member
- Posts: 730
- Joined: Fri Jun 23, 2006 3:40 am
- Location: Temecula, CA
Dont sell yourself short....my wife and I just got ours a week ago. She has adopted a mount/disomount method for her BV using the sidestand which makes for secure, confident use.peabody99 wrote: I have not gotten the nerve to ride it yet, because it is tall and heavy for me. I have an insanely short inseam
She deploys the sidestand before pushing her BV off the centerstand , then leans it over on the sidestand. Then she mounts the BV without having to obsess on supporting the weight. This method also lets her more carefully guide her boot through the sorta cramped footwell, (which is much smaller than that of her Vespa GT200L) and she feels very much in control of the BV when getting onto, or off of it.
She reverses the process at ride's end (sets the sidestand down, gets off and then puts the BV onto its centerstand for more security)
Oh, she loves her one-of-kind green BV-350, and handles it well. She's not a large gal either.
Give it a try...it's quite a nice scooter you may become a convert!
- Scooterboi
- Member
- Posts: 157
- Joined: Thu Sep 08, 2011 7:06 pm
- Location: Lakewood, CO
I just might. And right. One of the reasons I was getting a bigger scoot was to go on a highway ride and not freak out.skully93 wrote:There are some longer rides planned for the season, and we've discussed that not every ride will be 50cc friendly. lots of different trips.
We still might trailer some down for Amerivespa, you should go too.
- Scooterboi
- Member
- Posts: 157
- Joined: Thu Sep 08, 2011 7:06 pm
- Location: Lakewood, CO
-
- Member
- Posts: 1
- Joined: Mon Aug 12, 2013 2:41 am
I just bought a 2013 bv 350 last week and after 150 miles of driving, that seat is like crouching down on a stool. Very uncomfortable. I'm 6ft, 220 with a 32inseamJHScoot wrote:i have a 32in inseam and found the BV350 a bit cramped just sitting on it. i moved around and tried different foot positions, but to no avail. its a big scooter that didn't feel small, just not good enough leg / hip / knee ergos for me. i couldn't imagine feeling confident riding it at high speed or cornering. BUT when you ride body position changes, and a comfort zone can sometimes be found. so simply sitting on a stationary scoot can sometimes not be a good indicator. which is why yes, the "test ride" is always best imo. but not always possible, strangely enough. however i recall getting off the BV and shaking my head in disappointment, as it was just another big scoot to be scratched from my list and got me looking motorcycleScooterboi wrote:180 lbs 5'10" 33" inseam
I have sat on and test drove the Kymco 300 GTi (and which is supposedly an inch taller) and had no problems. Not flat footed but still easy to handle. Even if I flat footed on one side with the BV500 there was no problem.
I had considered the HD200 and it is a great scoot. I just don't think it has the power to get me through Eisenhower Tunnel and not be road pizza. Carb vs. EFI (altitude really sucks the top end out of a carb) and the lower horses were the deciding factors.
its not the reach of the feet to the ground that is ever a prob with longer inseam riders like us. its the reach to the foot board on a scoot and the pegs on a cycle that bother. the ground is easily reached, but how high the foot board is and how close the seat is what bothers most
i don't like my knees above my hips when i ride. as if i am sitting in a too short chair. i can fire off a list of big scoots, including maxi's, where this happens no matter where my ass is or my feet are placed. meh
you mentioned SYM. how about a CityCom? those are sweet and i am pretty sure seating will be good, as it is for myself
- mattgordon
- Member
- Posts: 730
- Joined: Fri Jun 23, 2006 3:40 am
- Location: Temecula, CA
That frikkin' seat!
The only mistake Piaggio made on that scooter is the dammed seat, IMO. I'm on revision #3 on mine and I finally think its gonna work for me.Ls40095 wrote:I just bought a 2013 bv 350 last week and after 150 miles of driving, that seat is like crouching down on a stool. Very uncomfortable. I'm 6ft, 220 with a 32inseamJHScoot wrote:i have a 32in inseam and found the BV350 a bit cramped just sitting on it. i moved around and tried different foot positions, but to no avail. its a big scooter that didn't feel small, just not good enough leg / hip / knee ergos for me. i couldn't imagine feeling confident riding it at high speed or cornering. BUT when you ride body position changes, and a comfort zone can sometimes be found. so simply sitting on a stationary scoot can sometimes not be a good indicator. which is why yes, the "test ride" is always best imo. but not always possible, strangely enough. however i recall getting off the BV and shaking my head in disappointment, as it was just another big scoot to be scratched from my list and got me looking motorcycleScooterboi wrote:180 lbs 5'10" 33" inseam
I have sat on and test drove the Kymco 300 GTi (and which is supposedly an inch taller) and had no problems. Not flat footed but still easy to handle. Even if I flat footed on one side with the BV500 there was no problem.
I had considered the HD200 and it is a great scoot. I just don't think it has the power to get me through Eisenhower Tunnel and not be road pizza. Carb vs. EFI (altitude really sucks the top end out of a carb) and the lower horses were the deciding factors.
its not the reach of the feet to the ground that is ever a prob with longer inseam riders like us. its the reach to the foot board on a scoot and the pegs on a cycle that bother. the ground is easily reached, but how high the foot board is and how close the seat is what bothers most
i don't like my knees above my hips when i ride. as if i am sitting in a too short chair. i can fire off a list of big scoots, including maxi's, where this happens no matter where my ass is or my feet are placed. meh
you mentioned SYM. how about a CityCom? those are sweet and i am pretty sure seating will be good, as it is for myself
- Dooglas
- Moderator
- Posts: 4373
- Joined: Sun Jul 08, 2007 2:17 am
- Location: Oregon City, OR
And that is very much a function of the size of the rider. I have a 30" inseam and find the seat quite comfortable. I have put several 300 mile days on it with no complaints (and I used to own an MP3 which really does have the seat from hell, no matter the size of the rider, so I know a lousy seat when I sit on onemattgordon wrote:The only mistake Piaggio made on that scooter is the dammed seat, IMO. I'm on revision #3 on mine and I finally think its gonna work for me.Ls40095 wrote:I just bought a 2013 bv 350 last week and after 150 miles of driving, that seat is like crouching down on a stool. Very uncomfortable. I'm 6ft, 220 with a 32inseam
