Hey guys, new to the forums and have a question. I have a Genuine Black Cat that was in the shop about 6 weeks ago after my lovely husband stripped the screw in the break fluid refill. I noticed when I got it back, that the engine seemed to be running high. Wasn't too worried about it but since then it's been acting weird.
I had no trouble with compression beforehand but now it loses compression when it's hot. Thought it was vapor lock at first since it was summertime but now it's cooler and it's still doing it. Friday it died while I was riding, right after it lost compression again (a couple minutes later) but it started right back up. Any ideas what the issue is? Can I still ride it without worry or should I call the shop? I seriously don't want to blow the engine... She's been a great bike and has over 150K on the engine!
Black Cat question
Moderator: Modern Buddy Staff
-
- Member
- Posts: 3
- Joined: Sun Sep 20, 2015 8:01 pm
- Location: Colorado
-
- Member
- Posts: 187
- Joined: Tue Sep 30, 2014 2:09 am
- Location: Southeast WI
-
- Member
- Posts: 3
- Joined: Sun Sep 20, 2015 8:01 pm
- Location: Colorado
-
- Member
- Posts: 16
- Joined: Wed Sep 23, 2015 2:01 pm
- Location: pensicola
-
- Member
- Posts: 3
- Joined: Sun Sep 20, 2015 8:01 pm
- Location: Colorado
roughrider2015 wrote:1500 engine should be fine
15000 needs piston/rings
150000 needs to be in the Smithsonian

- Attachments
-
- Mike on bike.jpg (49.97 KiB) Viewed 2062 times
- agrogod
- Member
- Posts: 1156
- Joined: Mon Jul 19, 2010 9:29 pm
- Location: Rancho Cordova, CA