Where can I find more 2 pin and 4 pin quick release clips?

Discussion of Genuine Scooters and Anything Scooter Related

Moderator: Modern Buddy Staff

Post Reply
User avatar
AZkid17
Member
Posts: 4
Joined: Mon Mar 27, 2017 8:41 am
Location: Phoenix, AZ

Where can I find more 2 pin and 4 pin quick release clips?

Post by AZkid17 »

I talking about the little white connectors that are used to plug into the dead lights. I don't need the wires (I didn't cut that piece off and lose it), I just need the white, red, black little 2 and 4 pin male and female connectors. I understand I could slay a wiring job together with a bunch of cool butt connectors, but I really like uniformity and would prefer to use the same kind. Where can I get them?
User avatar
babblefish
Member
Posts: 3118
Joined: Tue Dec 04, 2007 8:42 am
Location: San Francisco

Post by babblefish »

When I was in Phoenix on a job at Motorola many years ago, there were at least a couple of electronics surplus parts stores there. You might want to look for any that are still around either through the Yellow pages or online.

If what you want are connectors that match those used in scooters and motorcycles, then try Cycleterminal: http://cycleterminal.com/

If that fails, try Digikey electronics (www.digikey.com) or Mouser (http://www.mouser.com), but these will be standard industrial type connectors such as Molex and Amp.
Some people can break a crowbar in a sandbox.
User avatar
Syd
Member
Posts: 4686
Joined: Wed Jul 18, 2007 6:41 am
Location: Tempe

Post by Syd »

Check Frys Eletronics. They have everything.
The majority is always sane - Nessus
alexpa
Member
Posts: 21
Joined: Thu Jun 05, 2014 9:38 am
Location: Philadelphia

Post by alexpa »

I got mine on eBay. They are .110" connectors. Here's a sample search: http://www.ebay.com/sch/i.html?_from=R4 ... r&_sacat=0
Post Reply