Carb question for the roughhouse r50

GraywolfRH50 · Post by **GraywolfRH50** » Wed May 17, 2017 12:52 am

If I want to adjust the air/fuel screw what should I be looking for parts wise after I remove the epoxy plug? Tried looking for vids but no luck or I have word it wrong. ðŸ˜‚

larrball · Post by **larrball** » Sat May 20, 2017 1:35 am

1. Can i ask why you feel the need to adjust the A/F mix? is the stock setting not working for you?
2. Is this scooter under ANY warranty?
3. Do you know how to adjust the oil injection pump? (if needed)
4. Have you changed the spark plug/cleaned the carburetor and air filter?

What is it you are trying to achieve?

Get this spark plug if you can, and yes i know it's a bit on the pric$y side.
The Iridium Plugs last longer and overall just preform better.
Money well spent for all most any 2T engine.

ngk bpr7hix : https://www.ngk.com/product.aspx?zpid=9496

You don't have to buy it straight from NGK, but it's not a bad price nevertheless.
Don't forget to add a dab of oil/anti seize to the new plug and ALWAYS thread it in by hand first before you use a wrench.

GraywolfRH50 · Post by **GraywolfRH50** » Sat May 20, 2017 12:12 pm

I put on a aftermarket exhaust with a bigger jet but I want to fine tun it better and it's still under warranty but the shop I bought it from closed and no one else sells or works on genuine scooters. Plus I don't want to buy a adjustable carb if I don't have too