Discussion of Genuine Scooters and Anything Scooter Related
Moderator: Modern Buddy Staff
chancerbeans13
Member
Posts: 181 Joined: Wed Jun 11, 2008 4:00 pm
Location: Jacksonville FL
Post
by chancerbeans13 » Thu Jun 19, 2008 7:08 pm
Has anyone tried the PIAA 35w replacement? How does it compare to the Silverstar?
nissanman
Member
Posts: 1209 Joined: Thu Aug 09, 2007 4:11 pm
Location: Middletown, CT
Post
by nissanman » Thu Jun 19, 2008 7:20 pm
Yes, I've tried it...
Attachments
PIAAhigh2.JPG (62.19 KiB) Viewed 342 times
EZPZ #65
nissanman
Member
Posts: 1209 Joined: Thu Aug 09, 2007 4:11 pm
Location: Middletown, CT
Post
by nissanman » Thu Jun 19, 2008 7:21 pm
I've got comparison photos of the stock, PIAA and a HID at genuinerattler too.
EZPZ #65
chancerbeans13
Member
Posts: 181 Joined: Wed Jun 11, 2008 4:00 pm
Location: Jacksonville FL
Post
by chancerbeans13 » Thu Jun 19, 2008 7:44 pm
could you put the comparisons on here please
nissanman
Member
Posts: 1209 Joined: Thu Aug 09, 2007 4:11 pm
Location: Middletown, CT
Post
by nissanman » Thu Jun 19, 2008 8:01 pm
I'll try...
Attachments
HID low beam Xenonlow2.jpg (69.02 KiB) Viewed 317 times
HS1 low beam low2HS1.JPG (80.46 KiB) Viewed 317 times
PIAA low beam PIAAlow.JPG (71.69 KiB) Viewed 317 times
EZPZ #65
chancerbeans13
Member
Posts: 181 Joined: Wed Jun 11, 2008 4:00 pm
Location: Jacksonville FL
Post
by chancerbeans13 » Thu Jun 19, 2008 9:05 pm
I take assume the HID is the Silverstar
MPA
Member
Posts: 187 Joined: Fri May 09, 2008 2:34 am
Location: St Louis, MO
Post
by MPA » Thu Jun 19, 2008 9:40 pm
nah he actually installed an HID setup on his Rattler.
Is that the bulb the Rattler uses (HS1?) Does Sylvania make a Silverstar in that size?
nissanman
Member
Posts: 1209 Joined: Thu Aug 09, 2007 4:11 pm
Location: Middletown, CT
Post
by nissanman » Fri Jun 20, 2008 12:31 am
Hope, no Silverstar HS1. A HS1 is basically a 35W H4 bulb (a slight difference to the base of the bulb). That's why so many people stuff the Silverstar H4 in there. The HS1 is getting pretty common for ATVs etc because it will draw fewer amps and still provide some good light. 35W is about the same as a OEM foglight on a car. I'm sure there are going to be some more companies bringing their HS1s over here PIAA was just the first.
EZPZ #65
nissanman
Member
Posts: 1209 Joined: Thu Aug 09, 2007 4:11 pm
Location: Middletown, CT
Post
by nissanman » Fri Jun 20, 2008 12:40 am
High beam too
Attachments
HS1 high beam highHS1.JPG (78.89 KiB) Viewed 258 times
PIAA high beam PIAAhigh.JPG (71.72 KiB) Viewed 258 times
EZPZ #65