i thought i saw a thread floating around talk about creative ways to hold things on a Stella (but now i cant find it)
Thought i would share my very easy diy method to holding my coffee cup.
i have seen the suction cup idea (and i don’t trust it) i was also not a big fan of mounting something permanently to my bike
its basically just a piece of sound absorbing foam that i cut to fit inside of the bottom area of my glove box with a whole cut in it, also cut 4 slits cut in the hole (going out from the center) and made the hole a little bit smaller than a starbucks cup (so no matter what size i get, it will always hold it tightly)
enjoy
diy cup holder (for stella)
Moderator: Modern Buddy Staff
- toeknee
- Member
- Posts: 19
- Joined: Tue Jul 19, 2011 4:27 am
- Location: chicago
diy cup holder (for stella)
- Attachments
-
- IMG_3741.jpg (45.49 KiB) Viewed 840 times
-
- IMG_3742.jpg (123.13 KiB) Viewed 840 times
- JohnKiniston
- Member
- Posts: 578
- Joined: Mon Jun 18, 2012 5:08 pm
- Location: Tucson, AZ
- Contact:
- ericalm
- Site Admin
- Posts: 16842
- Joined: Sat Jun 10, 2006 3:01 am
- Location: Los Angeles, CA
- Contact:
Smart! If I forget my upholder (that hangs from the underseat hook), I usually just wedge the up in the corner of the glovebox using gloves, tools, rags, etc. This works 85% of the time. The rest of the time I spill varying amounts. A couple times, coffee all over.
Eric // LA Scooter Meetup Group // Stella 4T // Vespa LX // Vespa LXS // Honda Helix // some, uh, projects…
- ScootLemont
- Member
- Posts: 2526
- Joined: Fri Apr 11, 2008 6:20 pm
- Location: Lemont IL
- Contact:
Thanks for the idea
I like this a lot
I am going to add a slot to hold my cell phone (I usually ride with it in the glove box so I can resist checking my pockets to make sure I didnt drop it)
Right now I put it in a camera case to keep it from getting banged up on the metal interior of the glove box, but a slot in the foam would be perfect.
I like this a lot
I am going to add a slot to hold my cell phone (I usually ride with it in the glove box so I can resist checking my pockets to make sure I didnt drop it)
Right now I put it in a camera case to keep it from getting banged up on the metal interior of the glove box, but a slot in the foam would be perfect.
- toeknee
- Member
- Posts: 19
- Joined: Tue Jul 19, 2011 4:27 am
- Location: chicago
if you look in the second picture (look at the area on the inside of the glove box door) I used double sided sticky Velcro to attach two pockets I made out of old corduroy pants, one for my cell and another from my wallet (I hate having things in my pockets)ScootLemont wrote:Thanks for the idea
I like this a lot
I am going to add a slot to hold my cell phone (I usually ride with it in the glove box so I can resist checking my pockets to make sure I didnt drop it)
Right now I put it in a camera case to keep it from getting banged up on the metal interior of the glove box, but a slot in the foam would be perfect.
I figured using the double sided sticky Velcro was easier to upgrade the holders down the road (no pun intended)